HELp My BrOther CHangeD THe BIOS! (pic INside)

[Edg3h_91]

OK i saw my brother in the bios and i told him not to mess with that and he said he knew what he was doing. and he changed the FSB from 166Mhz to 200Mhz and now when i turn on the computer its turns on but nothing appears on the monitor like if the monitor was turned off. PLEASE HELp
(this is what he changed) from 166Mhz to 200Mhz
http://img224.imageshack.us/my.php?image=picture179sj.jpg

 

[PC eye]

He changed the memory timings from the 333mhz to 400mhz setting while you are still running DDR2700. To fix this fast you simply clear the cmos by removing the battery on the main board for a few seconds and move a jumper near the battery socket over one pin and the back to the default. Upon restarting the system you will then have to reset the time and date. If you are running an AGP card the AGP/PCI setting in the bios has to be set to AGP. If PCI-Express make sure it is on PCI there. Clearing the cmos will return everything there back to the defaults.

 

[Edg3h_91]

OK i take the little battery on the motherboard off and then move the jumper one and then put the battery back? how or do i just remove batery and chaneg jumper and start?

 

[Edg3h_91]

Oh my god Pc eye I love You! lol wel thanks got it to work really quick you made my whole week great lol well as for my brother im kickin hiS ... When he gets home thanks agian!

 

[PC eye]

OK there! I hope you returned the jumper back to the first pin if you moved it. If you didn't that is even better since on some boards that does have to be moved even after pulling the battery. But if it's now going without moving the pin don't worry. Just remember to set the AGP/PCI setting depending on the type card you are running. Default on most boards is PCI not AGP. Only change that if you are running an AGP card.