Help w/ overclocking amd 5200+

mx344

mx344

Active Member
Hi, ok so im new to the whole overclocking thing experience wise.So i just over clocked my amd 5200+ at 2.835ghz. U have heard that you can get this thing up to 3.0 on stock voltages. But i dont know how...

I am running an M2N-SLI motherboard.
I am running my ram at 800mhz w/ 6-6-6-18 timings
standard cpu voltage.
1.8 volt ram.

So i have my mutli set to auto, so it adjusts sometimes, but mostly stays to 13.5x.
The highest voltage for the cpu i can give is 1.325, But it is feeding more sometimes on the standard core voltage. 1.344?
I couldn't go any higher than 2.835 for some reason? any advice?

I trired putting my ram from 800 to 667 but that didn't work either.
 
windsor or brisbane core ? black edition?

im at 3010 mhz right now on my windsor core
which are supposedly harder to OC on
my ram is at 400mhz with tight timings
my cpu is running at 1.425 voltage though just because i dont feel like lowering it

mytemps are at...top temp=18 c
core 1 temp=39c
core 2 temp=35c
at idle with no thermal paste and aircooling
 
OO srry i forgot to tell, i have the new brisbane core.
The highest voltage i can go in bois is 1.325. And even iff i lower the ht mutli to x4, and put the ram to 667, i still cant even go to 211mhz, ima at 210 right now.
 
ok uhm theres probably somethign limiting you my motherboard itself wont overclock worth a cvrap if i have amd acq activated so try to look aroudn and disable things one by one with a bit higher oveclock whichever works THATs what you need to keep disabled
 
You must log in or register to reply here.
Back
Top