Greetings,
My PC spec:
i7-2600 @ 4GHZ
Gigabyte GA-Z68X-UD4-B3, Sandy bridge
DDR3 Corsair 2x4GB (1600Mhz)
MSI GTX 560-ti Twin Frozr II 1GB DDR5
PSU: Fortron Black Power 650W
(+3,3V/36A, +5V/30A, +12V1/18A, +12V2/18A, +12V3/18A, +12V4/18A, +5Vsb/3A, -12V/0.8A) - SLI ready, efficiency > 85%
is my PSU going to handle MSI GTX 580 Lightning Extreme 3GB DDR5 ?
http://www.amazon.com/MSI-N580GTX-L...MGXI/ref=sr_1_1?ie=UTF8&qid=1314570127&sr=8-1
as this card has cca 30-50W more consumption then my current GTX560. I run it overclocked and I see no problems here. (almost on 1000Mhz Core)
I'm not seeing the problem in W capacity, but that it has 4x 12V separate. So my GPU can use only two of them, so it's about 36A and there is recommended cca 42A. I know some ampers could be used from the mainboard, but still..
Can you guys help me figure it out?
Thank you.
Shamy12
My PC spec:
i7-2600 @ 4GHZ
Gigabyte GA-Z68X-UD4-B3, Sandy bridge
DDR3 Corsair 2x4GB (1600Mhz)
MSI GTX 560-ti Twin Frozr II 1GB DDR5
PSU: Fortron Black Power 650W
(+3,3V/36A, +5V/30A, +12V1/18A, +12V2/18A, +12V3/18A, +12V4/18A, +5Vsb/3A, -12V/0.8A) - SLI ready, efficiency > 85%
is my PSU going to handle MSI GTX 580 Lightning Extreme 3GB DDR5 ?
http://www.amazon.com/MSI-N580GTX-L...MGXI/ref=sr_1_1?ie=UTF8&qid=1314570127&sr=8-1
as this card has cca 30-50W more consumption then my current GTX560. I run it overclocked and I see no problems here. (almost on 1000Mhz Core)
I'm not seeing the problem in W capacity, but that it has 4x 12V separate. So my GPU can use only two of them, so it's about 36A and there is recommended cca 42A. I know some ampers could be used from the mainboard, but still..
Can you guys help me figure it out?
Thank you.
Shamy12
Last edited: