Here's the info from PC Wizard scan.
I have 1g of unknown speed
and 2g of 800hz I just bought.
I didn't realize that the RAM speed will take the slowest one.
I just want to know if it is ok to mix these two.
Thanks for your help!
General Information :
DIMM0 (RAS 9, RAS 11) : 1024 (Double Bank)
DIMM1 (RAS 9, RAS 11) : 2048 (Double Bank)
Information SPD EEPROM (DIMM0) :
Manufacturer : Kingston
Part Number : 99U5316-001.A02LF
Serial Number : 023FE848
Type : DDR2-SDRAM PC2-5300 (333 MHz) - [DDR2-666]
Format : Regular UDIMM (133.35 x 3)
Size : 1024 MB (2 ranks, 4 banks)
Module Buffered : No
Module Registered : No
Module SLi Ready (EPP) : No
Width : 64-bit
Error Correction Capability (EC... No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8 탎, Self Refresh
Voltage : SSTL 1.8v
Prefetch Buffer : 4-bit
Manufacture : Week 32 of 2007
Supported Frequencies : 200 MHz, 266 MHz, 333 MHz
CAS Latency (tCL) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
RAS to CAS (tRCD) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
RAS Precharge (tRP) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
Cycle Time (tRAS) : 9 clocks @200 MHz, 12 clocks @266 MHz, 15 clocks @333 MHz
Min TRC : 12 clocks @200 MHz, 16 clocks @266 MHz, 20 clocks @333 MHz
Information SPD EEPROM :
Manufacturer : Kingston
Part Number : Unspecified
Serial Number : 530684EA
Type : DDR2-SDRAM PC2-6400 (399 MHz) - [DDR2-800]
Format : Regular UDIMM (133.35 x 0)
Size : 2048 MB (2 ranks, 8 banks)
Module Buffered : No
Module Registered : No
Module SLi Ready (EPP) : No
Width : 64-bit
Error Correction Capability (EC... No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8 탎, Self Refresh
Voltage : SSTL 1.8v
Prefetch Buffer : 4-bit
Manufacture : Week 35 of 2009
Supported Frequencies : 200 MHz, 266 MHz, 400 MHz
CAS Latency (tCL) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @400 MHz
RAS to CAS (tRCD) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @400 MHz
RAS Precharge (tRP) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @400 MHz
Cycle Time (tRAS) : 9 clocks @200 MHz, 12 clocks @266 MHz, 18 clocks @400 MHz
Min TRC : 12 clocks @200 MHz, 16 clocks @266 MHz, 23 clocks @400 MHz
Memory Controller Information :
Memory Controller : DIMM
Number of connectors : 2
Max. Module Size : 2048 MB
Max. Memory Size : 4096 MB
Supported Speed : 70ns, 60ns
Supported Voltages : 2.9v
Error Detection Method : No
Error Correction Capability : None
Current/Supported Interleave : 1-way/1-way
I have 1g of unknown speed
and 2g of 800hz I just bought.
I didn't realize that the RAM speed will take the slowest one.
I just want to know if it is ok to mix these two.
Thanks for your help!
General Information :
DIMM0 (RAS 9, RAS 11) : 1024 (Double Bank)
DIMM1 (RAS 9, RAS 11) : 2048 (Double Bank)
Information SPD EEPROM (DIMM0) :
Manufacturer : Kingston
Part Number : 99U5316-001.A02LF
Serial Number : 023FE848
Type : DDR2-SDRAM PC2-5300 (333 MHz) - [DDR2-666]
Format : Regular UDIMM (133.35 x 3)
Size : 1024 MB (2 ranks, 4 banks)
Module Buffered : No
Module Registered : No
Module SLi Ready (EPP) : No
Width : 64-bit
Error Correction Capability (EC... No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8 탎, Self Refresh
Voltage : SSTL 1.8v
Prefetch Buffer : 4-bit
Manufacture : Week 32 of 2007
Supported Frequencies : 200 MHz, 266 MHz, 333 MHz
CAS Latency (tCL) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
RAS to CAS (tRCD) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
RAS Precharge (tRP) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
Cycle Time (tRAS) : 9 clocks @200 MHz, 12 clocks @266 MHz, 15 clocks @333 MHz
Min TRC : 12 clocks @200 MHz, 16 clocks @266 MHz, 20 clocks @333 MHz
Information SPD EEPROM :
Manufacturer : Kingston
Part Number : Unspecified
Serial Number : 530684EA
Type : DDR2-SDRAM PC2-6400 (399 MHz) - [DDR2-800]
Format : Regular UDIMM (133.35 x 0)
Size : 2048 MB (2 ranks, 8 banks)
Module Buffered : No
Module Registered : No
Module SLi Ready (EPP) : No
Width : 64-bit
Error Correction Capability (EC... No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8 탎, Self Refresh
Voltage : SSTL 1.8v
Prefetch Buffer : 4-bit
Manufacture : Week 35 of 2009
Supported Frequencies : 200 MHz, 266 MHz, 400 MHz
CAS Latency (tCL) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @400 MHz
RAS to CAS (tRCD) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @400 MHz
RAS Precharge (tRP) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @400 MHz
Cycle Time (tRAS) : 9 clocks @200 MHz, 12 clocks @266 MHz, 18 clocks @400 MHz
Min TRC : 12 clocks @200 MHz, 16 clocks @266 MHz, 23 clocks @400 MHz
Memory Controller Information :
Memory Controller : DIMM
Number of connectors : 2
Max. Module Size : 2048 MB
Max. Memory Size : 4096 MB
Supported Speed : 70ns, 60ns
Supported Voltages : 2.9v
Error Detection Method : No
Error Correction Capability : None
Current/Supported Interleave : 1-way/1-way