Issue

[bigrich0086]

im slowly over clocking my CPU.

when ever i up my FSB my ram goes up in speed. noramlly 800 now its 431 1:2.

i tried to keep ram at 800 but i cant. is there a way to do this.

my vcore is 1.273 i believe. and processor-NB is 1.23

HTT link is 200mhz.

doing this the OC is stable at 2.48 ffrom stock 2.3

 

[bigrich0086]

if i have hypertransport set higher than 200mhz in bios i wont post. this thats killing me is i dont have a manual ram fsb setting. i can change all the timings but not the speed. 437 1:2 is pushing it for me.

 

[bigrich0086]

everest reads dram:fsb 12:6.

i set the ram at 800 in bios timings are auto which are same timings before i Overclocked CPU. i even se the multiplier to 0 1 2 3 4 and i still get 12:6. will ddr2 800 ran at 870 be too much. theres plenty of cooling in the case.

Which one is right on the memory everest of cpuz