Learning To OC

X

Xijt

New Member
I have a MSI R270x gpu and i know its oced out the box, is there any potential to oc it a bit more and be stable?

I have been lurking around the net and found a base on how to start ocing. From what i read i start out adjusting the memory clock. Thread said keep adjusting until the screen locks up or it starts glitching then dial it back a bit and check temps. I had my card up too 1475 on memory clock and ran FurMark on a 15 minute run. Temps never went over 78C. After that i left it alone and tried running BF4, it ran fine for a bit but my gpu crashed so i had to do a hard reset on the system. Basically is there any more room for adjustment on stock cooling? I saw where any temps that were below 80 degrees celsius was safe. Am i wrong?
 
the can have allot more temp, but its best to stay below 80.
I always start bumping the core clock, after that the memory.
then test it longer then 15 minutes.
and don't forget benchmark stable doesn't mean its game stable.
let furmark run 1 hour
 
turbobooster said:
the can have allot more temp, but its best to stay below 80.
I always start bumping the core clock, after that the memory.
then test it longer then 15 minutes.
and don't forget benchmark stable doesn't mean its game stable.
let furmark run 1 hour
Click to expand...

I had my card configured too power limit was +5 core clock was still 1200 and memory was 1475, fans were 100 % and the card still crashed. Temps were under 80 C. Any idea what happened? My sound is still working but the video freaks out.
 
You must log in or register to reply here.
Back
Top