MB problem

CCPS

CCPS

New Member
My motherboard is working but no display. everything boots up but no beeps like for a video card or video. But there is 1 beep and it boots up and runs windows but im not getting display and the computer isnt kicking up . But everything works and all.
 
Have you checked all of your connections to make sure there seated good? What are your system specs?
 
I have a On board and Video card , thing is my Powersupply didnt work right and it was burning up so i put a new one in . Then i powerd the computer worked about hour or 2 then i hear beeping nouse when i was on the computer talking on aim then my on board card turned the power off on the monitor. But monitor still works. so i tryed a different card and it didnt work . So i reset the motherboard bois and started it up still didnt work. so i left it unhooked from the powersupply and monitor and internet. So anything you might think it is ?



Thanks.
Cody.
 
CCPS said:
My motherboard is working but no display. everything boots up but no beeps like for a video card or video. But there is 1 beep and it boots up and runs windows but im not getting display and the computer isnt kicking up . But everything works and all.
Click to expand...

Monitor bad. That's the POST beep that everything's working great. Meaning...

Either your contrast/brightness is low, or your have an loose connection.
 
Yeah then my powersupply fan stop working so idk if it over heated or what idk. But it turns on but it wont show any display. I put a new video card in and nothing happens. Idk if the MB is done or what . I took out the Ram And Cpu and changed them with different ram and cpu. But nothing happen. IDK what i can do now. I took all the connection out but the monitor.
 
CCPS said:
I have a On board and Video card , thing is my Powersupply didnt work right and it was burning up so i put a new one in . Then i powerd the computer worked about hour or 2 then i hear beeping nouse when i was on the computer talking on aim then my on board card turned the power off on the monitor.
Click to expand...

What do you mean the P/S was burning up, was it still running with the old P/S. If your computer stopped working after 2 hours of installing a new P/S it would lead be to the the P/S went bad.
 
Hello ok the old p/s Burned up because the fan was not runningso it burned up. So i put a new one in ( NOT really new but works ) . But im not getting any Display or bleeping beeping sound. But everything is powering up. So i tryed changing the CPU and Ram. and it didnt work. So i put a video card in PCI and still didnt work. Plus i tryed alot of P/S and see what one is better and works. But i can get display going.
 
CCPS said:
Hello ok the old p/s Burned up because the fan was not runningso it burned up. So i put a new one in ( NOT really new but works ) . But im not getting any Display or bleeping beeping sound. But everything is powering up. So i tryed changing the CPU and Ram. and it didnt work. So i put a video card in PCI and still didnt work. Plus i tryed alot of P/S and see what one is better and works. But i can get display going.
Click to expand...

Either your PSU is underpowering mobo and other components, the 6pin, 12V 4pin, or 20+4 pin it not plugged in.. or your motherboard fried.
 
You must log in or register to reply here.
Back
Top