Mobo config and specs show on startup

ShBm

ShBm

New Member
Every time I turn on my computer, this screen comes up that says "Press delete to configure BIOS." That stays on for about 5-10 seconds. Then, one comes up saying to hit F4 to configure RAID. After that, a black screen comes up with white letters showing all my computer specs. Finally, it goes to the logon screen. How can I get it to stop showing me all that crap?
 
Last edited:
As for the screen showing all that info, it will always do that. And believe me, at some point you will be glad it does. That info is sometimes very handy for trouble shooting problems. But for the raid configure, seems you have a jumper set for raid on your motherboard. Look at your motherboard manual and find that jumper and disable it. Or in your Bio's there should be something about your raid, make sure it is disabled.
 
The POST (power on self test) screen is always shown, you can't change that. However you can choose to replace it on some motherboards with the splash screen from the system/motherboard producer. This will be somewhere in the BIOS, but do this at your own risk. Change a setting and your PC may simply fail.
 
You must log in or register to reply here.
Back
Top