Karlos1981
New Member
For a P5Q Pro board and a 4870.
Ive just measured my case and its 11.5" accross too small for the Pro and the Radeon.
Ive just measured my case and its 11.5" accross too small for the Pro and the Radeon.
Need a cheap case that will be big enough...
- Thread starter Karlos1981
- Start date
Karlos1981
New Member
I thought mine was full sized until i measured it.
I guess i`ll get a cheap one off ebay, its hard finding one with its inner dimentions.
diduknowthat
formerly liuliuboy
That's only made for 12 X 9.6" motherboards, this ones 11.5" across...If it'd fit, it'd take out just about all the drive bays with it.
I would try this case,
http://www.newegg.com/Product/Product.aspx?Item=N82E16811128036
it fits up to 12 x 13" boards.
scooter
banned
What
diduknowthat
formerly liuliuboy
my bad, I misread the original post. I thought he said that his motherboard was 11.5" across
. Anyways, the 900 doesn't seem that much out of the ordinary in length. I'd look into full towers (not the 1200...it's the same length as the 900).Karlos1981
New Member
Its: 12.1 in
By: 9.7in
and the 4870 is: 13 in.
By: 9.7in
and the 4870 is: 13 in.
Karlos1981
New Member
Im a dilly!!
Length is from the ports to the front! i thought length was top to bottom!
It will fit in my case!
Length is from the ports to the front! i thought length was top to bottom!
It will fit in my case!
Karlos1981
New Member
I watch a review on Tigerdirect and he said 13" i thought that was too big.
Im guessing its nearer 10"
scooter
banned
Yeah man...I just checked again for you..they are 10.5" long with the connecters plugged into them too.
Unless different distrubuters have different lengths??
Mine are by Palit. but Sapphire and Asus are both the same length on the 4870's we have here too!