highonpie12
New Member
Just found this forum out and i was thinking about getting a nice big 32 inch tv but i was wondering if a monitor made for comps would be better for resolution and graphics but then i thought i should get a better video card first because my friends play CS source and DoD Source and my comp cant handle those here some of my specs.
Just gonna post some specifics in dxdiag
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.070227-2254)
Language: English (Regional Setting: English)
System Manufacturer: GATEWA
System Model: GT5012
BIOS: Default System BIOS
Processor: Intel(R) Pentium(R) D CPU 2.80GHz (2 CPUs)
Memory: 1014MB RAM
Page File: 598MB used, 1840MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
Graphics-
Card name: Intel(R) 82945G Express Chipset Family
Manufacturer: Intel Corporation
Chip type: Intel(R) 82945G Express Chipset Family
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_2772&SUBSYS_5049107B&REV_02
Display Memory: 128.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ialmrnt5.dll
Driver Version: 6.14.0010.4308 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 4/25/2005 13:48:28, 38014 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ialmnt5.sys
Mini VDD Date: 4/25/2005 13:56:18, 889628 bytes
Device Identifier: {D7B78E66-6432-11CF-1F63-4370A3C2CB35}
Vendor ID: 0x8086
Device ID: 0x2772
SubSys ID: 0x5049107B
Revision ID: 0x0002
Revision ID: 0x0002
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Not Available
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Basically im looking to spend anywere from $1-$400
Thank you for your time If you need any more info on my comp just tell me
Just gonna post some specifics in dxdiag
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.070227-2254)
Language: English (Regional Setting: English)
System Manufacturer: GATEWA
System Model: GT5012
BIOS: Default System BIOS
Processor: Intel(R) Pentium(R) D CPU 2.80GHz (2 CPUs)
Memory: 1014MB RAM
Page File: 598MB used, 1840MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
Graphics-
Card name: Intel(R) 82945G Express Chipset Family
Manufacturer: Intel Corporation
Chip type: Intel(R) 82945G Express Chipset Family
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_2772&SUBSYS_5049107B&REV_02
Display Memory: 128.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ialmrnt5.dll
Driver Version: 6.14.0010.4308 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 4/25/2005 13:48:28, 38014 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ialmnt5.sys
Mini VDD Date: 4/25/2005 13:56:18, 889628 bytes
Device Identifier: {D7B78E66-6432-11CF-1F63-4370A3C2CB35}
Vendor ID: 0x8086
Device ID: 0x2772
SubSys ID: 0x5049107B
Revision ID: 0x0002
Revision ID: 0x0002
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Not Available
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Basically im looking to spend anywere from $1-$400
Thank you for your time If you need any more info on my comp just tell me