No signal

W

willleiper

New Member
I was using my computer for a while and then went away for a while and came back to the usually sleeping mode. But when i tried to wake it up it wouldn't and then i turned the monitor off and back on and the acer logo would pop up and then it would say no signal. I have tried a different cable and a different monitor but nothing worked. I then tried taking out the RAM and putting it back in where it just turned on for about 10 seconds and did the regular start up but then turned back off to what it was before.
 
Try using a different card then. You will have to start diagnosing what it could be. Another thing you can try doing is resetting the cmos. Remove power from power supply, remove the cmos battery from the motherboard, press the power button on the case for 10 seconds, then wait 10 minutes. Then reinsert battery, reconnect power and try booting up.
 
johnb35 said:
Try using a different card then. You will have to start diagnosing what it could be. Another thing you can try doing is resetting the cmos. Remove power from power supply, remove the cmos battery from the motherboard, press the power button on the case for 10 seconds, then wait 10 minutes. Then reinsert battery, reconnect power and try booting up.
Click to expand...

I willl try to reset the cmos but trying the graphics card will be a problem because i have water cooling to the graphics card and have no idea how to control that.
 
You must log in or register to reply here.
Back
Top