Non OS Raid0 on a P5k

D

dward10

New Member
I am new to this forum. My question: I have a P5K Premium mb. The OS will be on a single drive. I have three drive that I would like to set up with a hardware Raid0 using this as the scratch drive for video editing. How do I set up the drives with Raid0????? I was doing the configuration with disk manager, but realized this is software raid(do not want that).

Thanks for any help
 
Instructions on how to use the hardware RAID controller are in the manual for your board. I don't know what page it's on because my download is running at a whopping 3kb/second (Asus site is always brutally slow) but you can get the manual here if you don't have a paper copy. I'll update this when it finally finishes.


Update: The RAID information starts on page 5-34. Your board has 2 raid controllers so how to set it up depends on which one you've plugged your drives into. How to setup both is in the manual under section 5.4 (5-35 for the intel controller and 5-42 for the jmicron)
 
Last edited:
You must log in or register to reply here.
Back
Top