I always have trouble when applying case cables/wires (I.E. the power switch, ect, ect) On this one, i have 3 things that i can't figure out where to go (or even if i have any place to put them). My motherboard is the P35 DS3, and i have these 3 cables that i do not know where to put, they are "1934", "HD Audio", and "AC, 97", Can anyone help me and tell me where to put these? (If anywhere)
NZXT Apollo case help (Wiring)
- Thread starter Noah
- Start date
skidude
Active Member
1934 is the front firewire port, and it will only be able to plug into your motherboard if it supports firewire (see your motherboard manual)
HD Audio should plug into the block where you plug in the power switch, reset switch, etc.
AC 97 is your front audio ports (the pink and green ports in the front) and that will either plug into your motherboard if you use onboard audio, or your soundcard if you have one. Be aware though that front audio overrides back audio on most motherboards, so if you plug in the front audio ports you back ports will not work.
HD Audio should plug into the block where you plug in the power switch, reset switch, etc.
AC 97 is your front audio ports (the pink and green ports in the front) and that will either plug into your motherboard if you use onboard audio, or your soundcard if you have one. Be aware though that front audio overrides back audio on most motherboards, so if you plug in the front audio ports you back ports will not work.
what do you mean overrides? in my experience it only overrides if you plug something into the front audio ports (which are ussually a mic port and a headphone jack) but it dosent disable the rear ports....
skidude
Active Member
On my old mobo, an MSI K8N-Neo4F, thats what it did, same with my old Asus A8R-MVP. I haven't tried it on my X-Fi yet, but I will now and post back.
