Ok Just build a new computer and i need some help plz

Craigk_c19

Craigk_c19

New Member
Ok i just build a new computer and well i forgot to order a hard drive so i used a 750 gb from a friend so i could go ahead and install windows 7 and get my computer set up the way i wanted well my hard drive has finally come in a month after ordering it and well the problem im having is 2 things when ever i clone the drive with acronis true image when i try to make the new drive the master drive i get BOOTMGR is missing and also when i was in the bios changing the order of what to boot first its showing my Sata drives as ide can someone help me with this??

my computer specs are

-NZXT Phantom PHAN-001WT White Steel / Plastic ATX Full Tower Case
-AMD Phenom II X6 1100T Black Edition Thuban(Overclocked to 3.8Ghz)
-ASUS M4A89GTD PRO/USB3 AM3 AMD 890GX SATA 6Gb/s USB 3.0 HDMI ATX AMD Motherboard
-G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600
-GIGABYTE GV-R587OC-1GD Radeon HD 5870 1GB 256-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card
-Sunbeam PSU-COM780-BK-US 780W(power supply)
-SONY Black Blu-ray Burner SATA
-Western Digital Caviar Black WD1002FAEX 1TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
-(2) Seagate Barracuda 7200.10 750GB SATA/300 7200RPM 16MB Hard Drive
-Microsoft SIDEWINDER X4 Keyboard
-Logitech MX 518 Optical Gaming Mouse
 
Ive had the same problem...For me, the power cable going to my HDD was loose...also you may want to check the SATA cables to make sure they work. :)
 
thanks ill give that a try!! i think after i can get this working im going to use the 1TB as my main drive and raid the other two in to RAID0 what do yall think? and if anyone else has any suggestion would be greatly appreciated!! because i still consider myself a noob
 
Craigk_c19 said:
bumb the last fix didnt work :(
Click to expand...

Apparently there is no standard sata driver on the harddrive. That being said I know with windows vista if that is missing it wont load windows onto your harddrive. I don't know about windows 7 Tho.
This may be a possibility.
 
thanks guys after i did the cloning i unplugged my other two drives then used the windows repair disk to repair the bootmrg error and right now im in the process of wiping my two other hdd to raid0 them as for the SATA drives showing IDE i dont know what thats about but under storage configuration they are set to AHCI ill post back when i have everthing running like i want thanks again guys
 
You must log in or register to reply here.
Back
Top