plz help AGAIN !!!!!!!

lubo4444

lubo4444

Active Member
how can i install my video card. The name of it is

MVGA-NVG34P 128MB W/TV DVI

can u explain me exactly wat to do and where to go because i am not very good with this stuff about cards :(((

and what drive do i have to install for it and from where to get it

thank you
 
First, open up your computer by removing the screws from the back that hold the side panel on. Once removed, locate the long, thin, white port on the motherboard. Firmly press your card into the socket and scew it to the case. Plug your monitor into the back port of the video card, when you get to Windows install the drivers that came on the CD/floppy.
 
thx for that it realy helps me . What kind of driver i need for it and how can i change the settings to be on 128MB not on 64 i think i am right now ?
plz explain where to go .

thank you
 
Are you talking about the onboard or actual card? If its onboard the setting should be in the BIOS, if its a card you should install the drivers that came on the cd.
 
You can't adjust the amount of RAM on the card. WHat you have is what you got... Might you be mistaking your agp aperture or something? That you can basically just leave alone.
 
The_Other_One said:
You can't adjust the amount of RAM on the card. WHat you have is what you got... Might you be mistaking your agp aperture or something? That you can basically just leave alone.
Click to expand...
well he said that he has a 128MB card, but he only has 64MB enabled.
 
ya omega u are right i got 64MB enabled but on the card is 128MB i dont know how to make it 128MB. Where can i download driver for it friend did that to me long time ago but dont know from where he got it and about the stuff u told me BIOS i dont even know whats that :(
 
thx for the site now can u explain me onle one last thing ...how to set up the settings for it ( can u tell me where exactly to go ...thx) and how can i make it 128MB ( same tell me where exactly to go ..:) )
 
lubo4444 said:
thx for the site now can u explain me onle one last thing ...how to set up the settings for it ( can u tell me where exactly to go ...thx) and how can i make it 128MB ( same tell me where exactly to go ..:) )
Click to expand...

Should be in Control Panel, Display, Settings then under Advance.
The 128mb thing, think your thinking AGP aperture in the bios, if its set on 64 it should be ok
 
i know its 64mb because friend installed me the card before and it was 64MB but he moved to other state and he cant help me anymore :( and i got last question whats this bios and how do u open it thats all THX VERY MUCH FOR THE HELP :)
 
when you turn on or restart, you should see a message that says press a certain button, normally delete, to enter bios.
 
k some of the ppl who helped me gave me site to download the driver for the card but they are many there i dotn know which one is ... i downloaded one but i dont think its the right one and the other thing is i putted the card but when the time came when windows says "welcome" mu screen is completely black and even sometimes turn the screen off i dont know how to fix this too help!
 
You must log in or register to reply here.
Back
Top