problem installing my motherboard...

B

BobbyWhiskey

New Member
Help!!!!

hello there
i just got a M7NCG 400 and im trying to install it but when i put the power the fans start, the cdroms and the harddrives start spinning normaly but i dont have anything on the monitor...
what do u think the problem is?
if my prossesor was dead will it do that?
 
Last edited:
its really wierd because when i start my comp without or with ram is do the same thing...
i chekced all connections... it sould work now :confused: :confused:
 
but I dont have anything on the monitor...
what do u think the problem is?
Click to expand...
Reseat the video and ram :)

its really wierd because when I start my comp without or with ram is do the same thing...
Click to expand...
Well the fact that the drives spin just means they are getting power... not that the system is supposed to work
 
ok thx...
i read alot reviews and they all say that this mobo hates some type of ram...
but its wierd because i tried with 2700 ram too and it doesnt work...
so do u think if i get another ram that works with this mobo and add the one i bought already, will it work?
 
i read alot reviews and they all say that this mobo hates some type of ram...
but its wierd because i tried with 2700 ram too and it doesnt work...
Click to expand...
In general you're not supposed to mix PC1600/PC2100 with PC2700+

so do u think if i get another ram that works with this mobo and add the one i bought already, will it work?
Click to expand...
Well if you buy memory that works with the mobo then i dont see why not :)
 
1- i would put a 2700 with a 3200 is that ok?

2- but the one a bought already doest work with my mobo... so if i buy another and i work then i add the one that doest work.. will it work?
 
1- i would put a 2700 with a 3200 is that ok?
Click to expand...
Yes

2- but the one a bought already doest work with my mobo... so if i buy another and i work then i add the one that doest work.. will it work?
Click to expand...
Except you said
so do u think if I get another ram that works with this mobo
Click to expand...
... so do you have working ram or not>?
 
Praetor said:
Yes


Except you said

... so do you have working ram or not>?
Click to expand...


No...
i read that everyone had Kingston ValueRam at it worked
so im gonna buy one from a local shop
and then i wanna put the one i already own ( it doesnt work )
and see if they work thogether

good plan?
 
ok i tryed a kingston ran and it doesnt work
is it possible that my power supply is not good enough?
or my mobo is just dead...
Click to expand...
Ok now im starting to get confused.. do you have any ram that works with the motherboard? If yes then you need to get similar ram if not then we look at other possibilities.
 
its okay to mix the memory types but your computer will run more efficient with the same. ex 3200 with 3200 or 2700 with 2700 instead of just 2700 with 3200. Are you sure your video card works and if the AGP on your motherboard can support it? because a 4x card won't work with an 8x mobo.
 
I had a similar problem on an Abit mobo. I found that when I seated the RAM, the mobo/ram socket flexed and the RAM did not seat correctly in the middle of the RAM stick. The ends seated fine. Look closer at the RAM to see if all the pins got seated.
 
You must log in or register to reply here.
Back
Top