Q6600 Owners...

[Kornowski]

Just curious, what settings you use?

Clock: 3.2Ghz
CPU Multi: X8
CPU vCore: 1.42
CPU FSB: 1.4v

 

[Shane]

Clock: 3.2Ghz
Cpu Multi: X9
Cpu VCore: 1.3625v
Cpu FSB: 357

Other

Memory voltage: 2.1V
Northbridge Voltage: 1.375
Southbridge Voltage: Auto

CPU FSB: 1.4v

uh? my BIOS says 357mhz lol not a voltage reading?

 

[bebopin64]

hes probably talking about fsb voltage

 

[Kornowski]

Yeah, I meant FSB voltage, my bad

 

[Shane]

what was your cpu voltage at when you were running it @ 3.4Ghz?

i can only overclock just over 3.3 or so ghz...if i go over my system fails too boot,well it just doesnt show anything on the monitor.

 

[Kornowski]

1.43v I think, wasn't that high.

 

[Twist86]

Clock: 3.2Ghz
CPU Multi: X8
CPU vCore: 1.350
CPU FSB: 1.3v

 

[Kornowski]

Clock: 3.2Ghz
CPU Multi: X8
CPU vCore: 1.350
CPU FSB: 1.3v

Dammit! My FSB won't go that low, I tried 1.35 and it'd just freeze up!

 

[Twist86]

Dammit! My FSB won't go that low, I tried 1.35 and it'd just freeze up!

Bout time your chip had a flaw. I will trade you my FSB for 6c drop in temps

 

[Kornowski]

Bout time your chip had a flaw. I will trade you my FSB for 6c drop in temps

Haha! Does it sound right though, for a chip to need that much on the FSB voltage? Could it be the lower Multi (higher FSB) causing it?

No deal!

 

[Twist86]

I dunno man I never messed with it...I just left it on default voltage....took it off auto then bumped my vcore till I got 3.2ghz.

 

[Archangel]

Clock: 3.61Ghz
CPU Multi: X9
CPU vCore: 1.45
(400MHz fsb, didnt change the voltage there, so is standard still )

 

[lion149]

whatever is stock ha

 

[Twist86]

whatever is stock ha

Stock is different for every batch of chips.

 

[Dropkickmurphys]

Clock: 3.01Ghz
CPU Multi: X9

I think... lol

 

[Kornowski]

I'd be interested in knowing what your FSB voltage is Arch, if you could find out, that'd be sweet!

Just for "lesser" members of this forum 4 > 2

 

[memory]

CPU Clock: 3.01
CPU Multi: 9x
CPU Vcore: 1.30
FSB: 335

 

[Archangel]

I'd be interested in knowing what your FSB voltage is Arch, if you could find out, that'd be sweet!

Just for "lesser" members of this forum 4 > 2

Any idea where I can find that?

 

[Kornowski]

It should just be in the BIOS, under advanced CPU options maybe? Or around all the voltage settings.

 

[Dropkickmurphys]

Just changed mine:

CPU Clock: 3.03
CPU Multi: 9x
CPU Vcore: 1.34375v
FSB: 337