Quick Question Motherboard,8800GTX and PSU Compatibility?

X

xrambo

New Member
Will these all work with each other, i read a review on Newegg that said its missing a pin the -5v thus making it 23 pins whats the deal with that. Also will this PSU have enough power to take 8800GTX's in sli....?thank you

PSU
Antec True Power Trio TP3-650 ATX12V 650W Power Supply with Three 12V Rails 100 - 240 V UL, CUL, FCC, TÜV, CE, C-tick, CCC, CB

Motherboard
eVGA 122-CK-NF68-AR Socket T (LGA 775) NVIDIA nForce 680i SLI ATX Intel Motherboard

Graphics Card
eVGA 768-P2-N831-AR GeForce 8800GTX 768MB 384-bit GDDR3 PCI Express x16 HDCP Video Card
 
Yes it looks like that will all work out. And I dont know why the reviewer said that, but it should have all 24 pins, otherwise everyone would be complaining.
 
Actually alot of the higher up PSU are only 23 pin they removed the -5V pin because most motherboards dont use it. I have that Antec Trio 650 and 1 pin is missing.
 
yes is common amoung new high end PSU's to have pin #18 (white wire) missing only old motherboards use it.


I would look to the seasonic 700 watt psu if I had your spec intentions the antec 650 (really a seasonic; which is very good) unit may work but the 650 will get pushed hard

both are high quality units and you are not trying to run a budget system by any means! those cards and the rest of your rig are well worth the 209.00 investment
 
Last edited:
You must log in or register to reply here.
Back
Top