Hey everyone I just recently built a low end rig and I just now ordered the video card but am affraid my PSU wont provide sufficient power to the card.
At visionteks website its minimum requirement is a 450w PSU an mine is only 430w thermaltake on a single rail my question is would it hold up without straining the PSU and components?
Thanks in advance
Rig Specs
Intel Core 2 Duo E4500 Allendale
Gigabyte Mobo
Wintec Memory 2gigz
Samsung Hard Drive 250gb
Lite-On DVD Burner
PSU Specs
Model
Brand Thermaltake
Model W0070RUC
Series TR2
Spec
Type ATX
Maximum Power 430W
Fans 2
PFC No
Main Connector 20+4Pin
+12V Rails Single
PCI-E Connectors 1 x 6Pin
NVIDIA SLI Support No
Modular Cabling Support No
Hold-up Time 16ms min.
Efficiency > = 65%
Over Voltage Protection +5V trip point < +7.0V, +3.3V trip point < +4.5V, +12V trip point < +15.6V
Input Voltage 115/ 230 V
Input Frequency Range 47 - 63 Hz
Input Current 9A @ 115V, 5A @ 230V
Output +3.3V@20A, +5V@30A, +12V@18A, [email protected], [email protected], +5VSB@2A
Features
Connectors 1 x Main connector (20+4 pin)
1 x 12V (P4)
9 x peripheral
2 x SATA
2 x Floppy
1 x PCI-E
Features Dual 8cm fan, Intelligent Black Cable Sleeving
Video Card Specs
Model
Brand VisionTek
Model 900203
Interface
Interface PCI Express 2.0 x16
Chipset
Chipset Manufacturer ATI
GPU Radeon HD 3850
Stream Processors 320 Stream Processing Units
Memory
Memory Size 256MB
Memory Interface 256-bit
Memory Type GDDR3
3D API
DirectX DirectX 10
OpenGL OpenGL 2.0
Ports
DVI 2
TV-Out HDTV / S-Video Out
VIVO No
General
Tuner None
RAMDAC 400 MHz
Max Resolution 2560 x 1600
CrossFire Supported Yes
Cooler With Fan
Operating Systems Supported Windows Vista (all versions)
Windows XP
Windows XP Media Center Edition
System Requirements PCI Express based PC is required with one X16 lane graphics slot available on the motherboard
450 Watt or greater power supply with 75 Watt 6-pin PCI Express power connector recommended (550 Watt for ATI CrossFireX with two 6-pin connectors)
Certified power supplies are recommended. Refer to http://ati.amd.com/certifiedPSU for a list of Certified products
1GB of system memory
Installation software requires CD-ROM drive
DVD playback requires DVD drive
Blu-ray / HD DVD playback requires Blu-ray / HD DVD drive
For a complete ATI CrossFireX system, a second ATI Radeon HD 3850 graphics card, an ATI CrossFireX Ready motherboard and one ATI CrossFireX Bridge Interconnect cable per board (included) are required
Dual-Link DVI Supported Yes
Windows Vista Certified for Windows Vista
HDCP Ready Yes
Features
Features ATI CrossFireX multi-GPU support for highly scalable performance
-Use up to four GPUs with an AMD 790FX based motherboard
High-speed 128-bit HDR (High Dynamic Range) rendering
Up to 24x Custom Filter Anti-Aliasing
55nm process technology
ATI Avivo HD video and display technology
Built-in HDMI and 5.1 surround audio
Support for the ATI Radeon DVI to HDMI adapter
Unified Video Decoder (UVD) for Blu-ray and HD DVD
ATI PowerPlay energy conserving technology
Dynamic geometry acceleration
At visionteks website its minimum requirement is a 450w PSU an mine is only 430w thermaltake on a single rail my question is would it hold up without straining the PSU and components?
Thanks in advance
Rig Specs
Intel Core 2 Duo E4500 Allendale
Gigabyte Mobo
Wintec Memory 2gigz
Samsung Hard Drive 250gb
Lite-On DVD Burner
PSU Specs
Model
Brand Thermaltake
Model W0070RUC
Series TR2
Spec
Type ATX
Maximum Power 430W
Fans 2
PFC No
Main Connector 20+4Pin
+12V Rails Single
PCI-E Connectors 1 x 6Pin
NVIDIA SLI Support No
Modular Cabling Support No
Hold-up Time 16ms min.
Efficiency > = 65%
Over Voltage Protection +5V trip point < +7.0V, +3.3V trip point < +4.5V, +12V trip point < +15.6V
Input Voltage 115/ 230 V
Input Frequency Range 47 - 63 Hz
Input Current 9A @ 115V, 5A @ 230V
Output +3.3V@20A, +5V@30A, +12V@18A, [email protected], [email protected], +5VSB@2A
Features
Connectors 1 x Main connector (20+4 pin)
1 x 12V (P4)
9 x peripheral
2 x SATA
2 x Floppy
1 x PCI-E
Features Dual 8cm fan, Intelligent Black Cable Sleeving
Video Card Specs
Model
Brand VisionTek
Model 900203
Interface
Interface PCI Express 2.0 x16
Chipset
Chipset Manufacturer ATI
GPU Radeon HD 3850
Stream Processors 320 Stream Processing Units
Memory
Memory Size 256MB
Memory Interface 256-bit
Memory Type GDDR3
3D API
DirectX DirectX 10
OpenGL OpenGL 2.0
Ports
DVI 2
TV-Out HDTV / S-Video Out
VIVO No
General
Tuner None
RAMDAC 400 MHz
Max Resolution 2560 x 1600
CrossFire Supported Yes
Cooler With Fan
Operating Systems Supported Windows Vista (all versions)
Windows XP
Windows XP Media Center Edition
System Requirements PCI Express based PC is required with one X16 lane graphics slot available on the motherboard
450 Watt or greater power supply with 75 Watt 6-pin PCI Express power connector recommended (550 Watt for ATI CrossFireX with two 6-pin connectors)
Certified power supplies are recommended. Refer to http://ati.amd.com/certifiedPSU for a list of Certified products
1GB of system memory
Installation software requires CD-ROM drive
DVD playback requires DVD drive
Blu-ray / HD DVD playback requires Blu-ray / HD DVD drive
For a complete ATI CrossFireX system, a second ATI Radeon HD 3850 graphics card, an ATI CrossFireX Ready motherboard and one ATI CrossFireX Bridge Interconnect cable per board (included) are required
Dual-Link DVI Supported Yes
Windows Vista Certified for Windows Vista
HDCP Ready Yes
Features
Features ATI CrossFireX multi-GPU support for highly scalable performance
-Use up to four GPUs with an AMD 790FX based motherboard
High-speed 128-bit HDR (High Dynamic Range) rendering
Up to 24x Custom Filter Anti-Aliasing
55nm process technology
ATI Avivo HD video and display technology
Built-in HDMI and 5.1 surround audio
Support for the ATI Radeon DVI to HDMI adapter
Unified Video Decoder (UVD) for Blu-ray and HD DVD
ATI PowerPlay energy conserving technology
Dynamic geometry acceleration