Ram timing problem

[JoeSamo]

heres a link to my ram (8 gigs) http://www.newegg.com/Product/Product.aspx?Item=N82E16820227289

here are pictures of my bios

http://img35.imageshack.us/img35/7756/ramcm.jpg

http://img708.imageshack.us/img708/7485/ram2.jpg

http://img697.imageshack.us/img697/3900/ram3l.jpg


My system is crashing because since i put the ram in 1066 the ram timings are off

what should the settings be so that the timings are correct?

btw the pc is the one in my sig

thanks

joe

 

[Cromewell]

According to the specs on newegg you want:
Tcl - 5
Trcd - 5
Trp - 5
Tras - 18

Be sure to set the vdimm to at least 2.1v, possibly 2.2v before trying to boot at these settings. The timings that are set when you initially set to 1066 should be ok, a lot of DDR2 needed at least 1.9v to be stable especially at higher clock speeds, if you haven't changed the voltage settings you are probably running 1.8v and that could be your problem.