Miseryguts
Member
I have 6GB of triple channel Corsair TR3X6G @ 723MHz 10-10-10-27 and have been told that better timings will improve performance, is this true & if so how do I go about it?
Last edited:
Ram Timings?
- Thread starter Miseryguts
- Start date
On most RAM kits you can tighten up the timings a bit or add additional voltage for a little more stability.
The ones you want to look at are the ones you had listed, start in order with CL->tRCD->tRP->tRAS. CL10 at 1333 is a little latent so you may have some room for improvement. It also looks like that kit is rated for 9-9-9-24 at 1.5V.
Also, improving the frequency/clock-speed also lowers your total RAM latency. If you were able to bump it to 1600 at 10-10-10 it would be a little less latent than tighter timings at 1333 9-9-9 or similar.
http://en.wikipedia.org/wiki/DDR3_SDRAM#JEDEC_standard_modules
The ones you want to look at are the ones you had listed, start in order with CL->tRCD->tRP->tRAS. CL10 at 1333 is a little latent so you may have some room for improvement. It also looks like that kit is rated for 9-9-9-24 at 1.5V.
Also, improving the frequency/clock-speed also lowers your total RAM latency. If you were able to bump it to 1600 at 10-10-10 it would be a little less latent than tighter timings at 1333 9-9-9 or similar.
http://en.wikipedia.org/wiki/DDR3_SDRAM#JEDEC_standard_modules