Smth Simple maybe ?

H0nDA2000

H0nDA2000

New Member
i have speedfan but i cant understund the temps (like what temp is for what thing) i have my pc up for 5 days and the temps are
Temp1: 41'c
Temp2: 50'c
Temp3: 128'c
HD0: 38'c
HD1: 43'c
Temp1: 22'c
{{and the system tray temp 41 'c)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
There isnt a programm for overclocking my Mb (i think) So..
,,,,is there smth in the bios to just increase it and make my speeds faster like overclock my cpu ? from 2,8 to 3,0 ? ( i think its a safe one)
{i dont know what power supply i have :( to tell u (like its rates) and i think its ipportand ?or not?}
:confused: :confused: :D
 
Last edited:
the temp1 thats 41'c is the cpu, the one thats 50'c is prolly the mobo, hd0 is the harddrive temp, hd1 is prolly nothin cause on my system it goes to past freezin somtimes,dont kno about the 22 it might be the case

if u really want to know go get everest (search google for it) get home edition (its free) and it tells u the temps with the names already by it,(click mobo/sensors to see the temps) also you prolly would like it ne ways , it tells you all kinds of stuff about ur system

and in speed fan you can put the names of what everything is by click the temp in the cofiguration and push f1
 
yes , usually ur bios will have the options for over clocking , wip out the calculator and change the fsb according to the speed u want , somtimes ur system will act wierd when u do this , like not show ne thing on the monitor and not boot up , or reach the xp load screen then reset, if this happens then ull have to reset the cmos, by switching the jumper and taking out the battery for 10 secs , also unplug ur system when u do this..

if ur bios doesnt have the "avanced chipset options" then u will have to flash the bios and get a new bios to work with , this is dangerous, if u really want to , come back and i will walk you through it or go get the bios version u need my self and make a iso for the boot disk for u

hope this helps;)
 
Last edited:
thx m8 u really helped ,, but :D
i did understund what to do with "wip out the calculator and change the fsb according to the speed u want" ,,, can u tell me how ? what to do ? step by step ? :D
 
Well i can tell you 128C for Temp3 is definitely ... wrong ;)
 
Last edited:
hmm... no1 ??
i did undertund this "wip out the calculator and change the fsb according to the speed u want".
some1 to tell me What i have to calculate and what to change in my bios according to how much i whant to increase ? in simple ways ?
 
I looked in my bios and in Advanced bios setting but i couldnt find anything for FSB to change it :(
i could only find smth CPU Host/Pci CLOCK and it was set to deafult
and had these options:
126/33mhz
133/33mhz
134/33mhz
148/37mhz
...and ect....

maybe that it ? i dont know i did find anything else and i am not very familiar with bios

maybe i must flash the bios (but thats really hard for me too)
 
You must log in or register to reply here.
Back
Top