Rip_Uk
Active Member
Recently I set up my router to forward a port for both my laptop and desktop computers. To allow the port to be forwarded for the correct machine I needed to set up static IP addresses.
I had no problems with my Windows Vista Home laptop, I disabled IPv6 and set the IPv4 details as below:
IP Address: 192.168.1.101
Subnet Mask 255.255.255.0
Default Gateway: 192.168.1.1 (Linksys WRT54GL v4)
Dns Servers: 192.168.4.100
192.168.8.100
The laptop connected to the router and Internet fine and the port was forwarded successfully.
I then disabled IPv6 and set the details of my Windows 7 desktop computers IPv4 to:
IP Address: 192.168.1.100
Subnet Mask 255.255.255.0
Default Gateway: 192.168.1.1 (Linksys WRT54GL v4)
Dns Servers: 192.168.4.100
192.168.8.100
Upon pressing the Ok button I get a DNS server error. What am I doing wrong here?
I had no problems with my Windows Vista Home laptop, I disabled IPv6 and set the IPv4 details as below:
IP Address: 192.168.1.101
Subnet Mask 255.255.255.0
Default Gateway: 192.168.1.1 (Linksys WRT54GL v4)
Dns Servers: 192.168.4.100
192.168.8.100
The laptop connected to the router and Internet fine and the port was forwarded successfully.
I then disabled IPv6 and set the details of my Windows 7 desktop computers IPv4 to:
IP Address: 192.168.1.100
Subnet Mask 255.255.255.0
Default Gateway: 192.168.1.1 (Linksys WRT54GL v4)
Dns Servers: 192.168.4.100
192.168.8.100
Upon pressing the Ok button I get a DNS server error. What am I doing wrong here?