System failure in new Windows Vista installation.

G

garyknowz1

New Member
I just built my PC. Specs are as follows:

6600 Core 2 Quad 2.4
EVGA nForce 780i mobo
4 GB memory
Rosewill 850W PSU
2x EVGA GeForce 8800 GTS SLI
2x Seagate 500 GB HDD, SATA (striped)
Koolance Exos2 750 Liquid Cooling

When installing Windows Vista, I get through most of the installation process, However, after passing the “Windows is preparing to start for the first time...", Vista is getting ready to install drivers and such, I repeatedly get a blue screen with the following message:

“A problem has been detected and Windows has been shut down to prevent damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you’ve seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need.

If problems continue, disable of remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

Technical information:

***Stop: 0X0000000A (0XFFFFFA802880010A, 0X000000000000000Z, 0X00000000000000000, 0XFFFFF8000185Z51)

Collection data for crash dump…
Initializing disk for crash dump…
Beginning dump of physical memory…Dumping physical memory to disk: 0”

I think it might be the GPUs, or the RAID set up, but I’m not exactly sure what to do here.

Any help is appreciated. Thank you.

Gary K.
 
i believe that is a ram issue. try takeing out the ram and putting it back in. if not try taking out all and put one chip at a time
 
Is this a 32-bit or 64-bit Vista OS?

I believe that the 32-it version can only see 3.5GB of ram.:(
 
Indeed, it was a RAM issue. I took out one of the 2GB sticks, and reinstalled without any glitches.

Thanks a ton!



Oh yeah...I do have the 64bit version. I was able to install a patch from the MS website after installation, reinstalled the second 2GB stick and all was peachy.
 
Last edited:
hackapelite said:
True... it may vary though, could be anything between 3 and 3.5 GB. Having more memory than the 32 bit version can handle shouldn't cause any problems, though...i think.
Click to expand...

It wont bother a thing. A 32 bit OS just ignores the extra RAM. Does not have enough addresses for it.
 
Sorry to go off topic but, thanks for posting this. I plan to get that same CPU and motherboard, so I'm hoping things work for me as well. I'll have 2GB dual channel and a 4GB dual channel, so if I get the same error I'll know how to fix it.

Thanks.
 
You must log in or register to reply here.
Back
Top