JSquier New Member Oct 21, 2006 #1 I OCed my cpu 5% increase and is goes to 2.52ghz. If I do the 10%, it won't boot. Any steps I should take to increase this?
I OCed my cpu 5% increase and is goes to 2.52ghz. If I do the 10%, it won't boot. Any steps I should take to increase this?
Geoff VIP Member Oct 21, 2006 #2 I would try to get it in between the 5% and 10%. Or you can raise the vcore voltage slightly, and/or lower the memory speeds.
I would try to get it in between the 5% and 10%. Or you can raise the vcore voltage slightly, and/or lower the memory speeds.
JSquier New Member Oct 21, 2006 #3 Lower the memory speeds and raise voltage. I guess just little amounts each time I suppose....
Geoff VIP Member Oct 21, 2006 #4 You can only set the memory speeds to DDR266, DDR333, and DDR400 I believe. If I were you, I would set it to DDR333, and raise the vcore only slightly, then try overclocking the CPU again.
You can only set the memory speeds to DDR266, DDR333, and DDR400 I believe. If I were you, I would set it to DDR333, and raise the vcore only slightly, then try overclocking the CPU again.
JSquier New Member Oct 21, 2006 #5 Alrighty, thanks. I will try it later tonight and see what happens
