First off, my system:
Antec nine hundred case
AMD Athlon 64 X2 6000+ 3.01GHz processor
Thermaltake Big Typhoon VX fan/heatsink
4gb OCZ ATI Crossfire PC2 6400 memory
(2) ATI Radeon x1950 Pro 256mb video cards
BFG Technoligies 650 watt PSU
OCZ Xtc Memory Cooler
ASUS M2R32-MVP motherboard
Logitech Z-5300e 280 watt 5.1 surround sound
Logitech G15 gaming keyboard
Logitech LX7 wireless mouse
(2) Lite-On 16X DVD+/-RW Burners
160gb original internal hard drive
500gb Western Digital internal hard drive
320gb Seagate external hard drive
Hauppauge Win-TV-pvr 150 tuner card
Dual HP w1907 19" widescreen LCD monitors
Now onto the problem, I was running the 2 video cards with no problems for a few months. Then out of the blue, the bios chip on my mobo crashed(never determined what caused it). After ASUS sent me a new chip, one of the video cards quit working. I have taken them out and reseated them, switched them around on the mobo slots, and tried just running the 'bad' card. When I run only the 'bad' card, the computer boots but the monitors say no signal detected and go into standby. I have since only been running on the one card, but would like to get the second one back up and going. Any ideas or help is much appreciated.
Antec nine hundred case
AMD Athlon 64 X2 6000+ 3.01GHz processor
Thermaltake Big Typhoon VX fan/heatsink
4gb OCZ ATI Crossfire PC2 6400 memory
(2) ATI Radeon x1950 Pro 256mb video cards
BFG Technoligies 650 watt PSU
OCZ Xtc Memory Cooler
ASUS M2R32-MVP motherboard
Logitech Z-5300e 280 watt 5.1 surround sound
Logitech G15 gaming keyboard
Logitech LX7 wireless mouse
(2) Lite-On 16X DVD+/-RW Burners
160gb original internal hard drive
500gb Western Digital internal hard drive
320gb Seagate external hard drive
Hauppauge Win-TV-pvr 150 tuner card
Dual HP w1907 19" widescreen LCD monitors
Now onto the problem, I was running the 2 video cards with no problems for a few months. Then out of the blue, the bios chip on my mobo crashed(never determined what caused it). After ASUS sent me a new chip, one of the video cards quit working. I have taken them out and reseated them, switched them around on the mobo slots, and tried just running the 'bad' card. When I run only the 'bad' card, the computer boots but the monitors say no signal detected and go into standby. I have since only been running on the one card, but would like to get the second one back up and going. Any ideas or help is much appreciated.
