Will it fit?

H

helmie

New Member
Hi,
Im planning to buy this case: http://www.ebuyer.com/customer/products/index.html?rb=12642481717&action=c2hvd19wcm9kdWN0X2dhbGxlcnk=&product_uid=55432

and put this PSU in it:http://www.ebuyer.com/customer/products/index.html?action=c2hvd19wcm9kdWN0X292ZXJ2aWV3&product_uid=97851

The problem is that the psu is designed as a server class PSU, so its quite big. What im wondering is will the psu fit in that case?

Also, what do you think would be better: 2 x 80mm fans at back or 1 120mm?

Thanks
 
I think it will fit, Im not sure but im pretty sure. In my opinion 2 x 80mm would be better.
 
my opinion is a 120mm fan PSU, cuz there is less noise, smaller fan, more noise, so i would say go with 120mm plus it cools better
 
My system is gona be noisy anyway as the PSU only have one 80mm Fan and theres gona be two 80mm fans up front, one in the window, and two wee fans on the HDD Cooler, so to reduce noise i was gona get a few Antec Noise Killer 80's. They reduce the fan noise by 80% (Apparently) So its gota be worth a try.
 
so to reduce noise i was gona get a few Antec Noise Killer 80's. They reduce the fan noise by 80% (Apparently) So its gota be worth a try.
Click to expand...
I wouldn't rely on those too much to cut down on noise. The only noise it will reduce will be that caused by the bearings and unbalance of the fan, which in a good, high quality fan should be low to begin with. The rest of the noise will be due to the aerodynamic characteristics (the reason they advertise them as reducing the noise by up to 80%)
 
You must log in or register to reply here.
Back
Top