newbie_bewbie
New Member
Hello! I should start off by saying that I have never built a computer before nor do I exactly understand what each part of the computer does. With that said, I have put together a mixture of parts that I have either read online or someone has suggested to me in hopes that I would be able to put something decent together that could get the job done. Although I'm not even sure if they'd all work together, the parts I have taken a look at are:
-Intel Core i7-2600 Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor
-CORSAIR XMS 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2000 (PC3 16000)
-SAPPHIRE Vapor-X 100283VX-2L Radeon HD 5770 (Juniper XT)
-ASUS M4A88TD-M/USB3 AM3 AMD 880G SATA 6Gb/s USB 3.0 HDMI Micro ATX AMD
-Western Digital Caviar Black WD1001FALS 1TB 7200 RPM SATA 3.0Gb/s 3.5"
-Antec NSK 4482B Black 0.8mm cold rolled steel ATX Mid Tower Computer Case 380W Power Supply
-LITE-ON DVD/CD WRITER Black SATA Model iHAS524-T98A
This is a few hundred above what I am looking to spend, however, I am looking to be able to run (not necessarily all at once) the Adobe Suite programs, CAD programs, Maya, etc, so I understand the cost will be above what I would like. So, if anyone has any suggestions or tips on where I can reduce the cost or anything at all please let me know, I am completely lost in this process so anything helps, Thanks!
-Intel Core i7-2600 Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor
-CORSAIR XMS 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2000 (PC3 16000)
-SAPPHIRE Vapor-X 100283VX-2L Radeon HD 5770 (Juniper XT)
-ASUS M4A88TD-M/USB3 AM3 AMD 880G SATA 6Gb/s USB 3.0 HDMI Micro ATX AMD
-Western Digital Caviar Black WD1001FALS 1TB 7200 RPM SATA 3.0Gb/s 3.5"
-Antec NSK 4482B Black 0.8mm cold rolled steel ATX Mid Tower Computer Case 380W Power Supply
-LITE-ON DVD/CD WRITER Black SATA Model iHAS524-T98A
This is a few hundred above what I am looking to spend, however, I am looking to be able to run (not necessarily all at once) the Adobe Suite programs, CAD programs, Maya, etc, so I understand the cost will be above what I would like. So, if anyone has any suggestions or tips on where I can reduce the cost or anything at all please let me know, I am completely lost in this process so anything helps, Thanks!