cpu temp

C

cod3lt

New Member
i just downloaded core temp and i was wondering if 97F/36C is normal of a intel core 2 quad q6600 on a 1 or 2 % load thanks
 
that temps okay,however im at 3.2Ghz with the same processor and im getting around the same temps as you so maybe re-applying thermal paste could lower them or getting more airflow in your case would help.

But nothing to worry theyre fine temps ;)
 
mep916 said:
My Q6600 (B3 stepping) would idle at that same temp. It's fine.
Click to expand...

I thought the B3's were meant to run hot, but that isn't that bad!

Mine idles at about 23c, but around 32c when I've got a load of apps open, so you've got nothing to worry about!

Mike, did you see a difference when going from the Q6600 to the Q9450, you had them both at 3.4Ghz, right?
 
Kornowski said:
Join us common folk! :P
Click to expand...

lol. It was a bad purchase to begin with. I thought I could get it stable @ 3.8 for 24/7 F@H use. It'll bench at 3.6, but no higher, even with my fancy pants Rampage Formula that I will likely sell to funkysnair.
 
Kornowski said:
I thought the B3's were meant to run hot, but that isn't that bad!

Mine idles at about 23c, but around 32c when I've got a load of apps open
Click to expand...

I am 90% convenienced he sold his soul though to get those temps.


I run 31c idle and 48c at 100% @ 3.2ghz @ 1.35v...Prime95 however I run 55c so no 3.4ghz for me. Still I payed 16 bucks for my cooler so I can't complain...but I can cry that I wont be hitting 3.6ghz.
 
Last edited:
Twist86 said:
I am 90% convenienced he sold his soul though to get those temps.
Click to expand...

he has no soul :D hes a machine.


Twist86 said:
I run 31c idle and 48c at 100% @ 3.2ghz @ 1.35v...Prime95 however I run 55c so no 3.4ghz for me. Still I payed 16 bucks for my cooler so I can't complain...but I can cry that I wont be hitting 3.6ghz.
Click to expand...

i cant go any higher than 3.3Ghz on mine because my load temps go over 60c.

might invest in a Tuniq tower,ACTUALY that would make a good xmas present :D
 
Twist86 said:
I am 90% convenienced he sold his soul though to get those temps.
Click to expand...

How'd you know!?

Untitled-17.jpg


Here's a shot of load temps, which is a bit bigger, so I'll just post a link;
http://i184.photobucket.com/albums/x284/Kornowski_2007/Capture.jpg

I want to try going for 3.6, maybe more, but I don't think my PSU will handle it.
 
Gimme a screenshot of the second batch of tests the 80000 if you could. I get a 5-6c increase on that set of tests ^-^


Still how crazy...I was told the performance difference was not worth the price on the TT120 boy was I lied too.


I wanna see 3.6ghz

Well lets say it takes 1.45v to hit 3.6ghz it would take 192w of power on a G0 (give or take a few)
 
Last edited:
Nevakonaza said:
nah i think your psu will be okay,it wont use that much more voltage will it?
Click to expand...

I don't know. I guess there's only one way to find out, Eh.

Twist86 said:
Gimme a screenshot of the second batch of tests the 80000 if you could. I get a 5-6c increase on that set of tests ^-^


Still how crazy...I was told the performance difference was not worth the price on the TT120 boy was I lied too.


I wanna see 3.6ghz :)

Well lets say it takes 1.45v to hit 3.6ghz it would take 192w of power on a G0 (give or take a few)
Click to expand...

Second batch? In Prime95?

It may not be the TT, it may just be that I got a good chip.
Well, that's the thing, At the moment, I'm idle using 260watts, and the most I've seen it use is 465watts... So I think I may be Ok.
 
You must log in or register to reply here.
Back
Top