Will My Motherboard run a GTX 295?

[erebusting]

I have an ECS pt890t-a motherboard and I am currently running a 9800gtx+, but I would like to take advantage of my trade up program before the time is up and I would like to get a gtx 295...
I was wondering if anyone can tell me if it should/could run it or not?

...side question:.I will be using a 680w psu with a c2q....would that be enough?...

 

[StrangleHold]

If the board will run a 9800GTX+ it will run a 295. Now the P/S is a different story. What brand P/S is this. Pretty sure the 295 minimum recommended on the 12V rail is 45/46 amps.

 

[erebusting]

If the board will run a 9800GTX+ it will run a 295. Now the P/S is a different story. What brand P/S is this. Pretty sure the 295 minimum recommended on the 12V rail is 45/46 amps.

mine says 36a on the 12+v rail

 

[JTM]

mine says 36a on the 12+v rail

Then most likely you would want to upgrade the PSU. You will have functioning problems if you run it at lower amps then supported.

 

[StrangleHold]

Yeah you would be digging pretty close to a gas line.

 

[erebusting]

how many watts should I get...750w you think?
I would like to do quad sli in the future maybe even....