Post A Pic Of Your Pc Here :)

FuryRosewood

Active Member
Lost some ram today, will say i do support 2011 sockets more now, if this is a standard feature. the P9x79 Deluxe found that two of my sticks were sick and disabled a bank of ram, leaving me with the other bank. Only way I noticed was that the computer said i was down to 16 gig of ram, and the other bank's RAM wasnt lit.
 

S.T.A.R.S.

banned
Received my Blu Ray Burner on Saturday and I installed it and cleaned out my system using some compressed air. I was going to take some photos of the PC on Saturday but shortly after I cleaned out the PC I had to go to hospital quite unexpectedly so I took the photos tonight cos' PCunicorn was bugging me on Steam about it. :p

Obviously it's been turned on a few times since Saturday so the dust has crept back in. :(

Oh by the way the Maxtor hard drive serves no purpose whatsoever. It's not plugged into anything and I have no idea if there's anything on it. :D

DSC_3118-2web_zps9722598e.jpg


DSC_3123web_zpsb449d00e.jpg


DSC_3132web_zps000c1c3d.jpg


DSC_3128web_zpsdfc49da2.jpg


DSC_3124web_zps353381fc.jpg


DSC_3127web_zps769fadd6.jpg

That's a big CPU cooler you have there lol.
 

PCunicorn

Active Member
Your right, that's such a awful turd. It's so awful, you should pay somebody to take it off your hands, but don't worry, I will do it for free. :p
 

claptonman

New Member
YliVQeX.jpg


New stuff:
-Intel i5 4670k
-Gigabyte GA-Z87-UD3H
-Thermaltake Water 2.0 Extreme closed-loop

Benches will be posted tomorrow, maybe. Still gotta install everything and all that. Waiting on some more Corsair fans, also.
 

S.T.A.R.S.

banned
NEWS:

It's been some time since I said I was gonna post first pictures of the things I have done so I think it's FINALLY time to post first pictures before I make the video I promised.Right now as I am writing this the data on my UAC data device is being moved from the DISK 6 to the DISK 1 and it will probably take until tomorrow since there are more than 500000 files in total and many of them are up to few GB in size.
And (believe it or not) when that finally finishes tomorrow,I am going to take the UAC data device from my UAC data complex center working environment room (which I will also show you as promised,just not tomorrow) and take it to my living room and put it on a small table.

WHY?

For ONE SINGLE reason.I am going to take few pictures of it with my digital camera from few different corners so I can FINALLY SHOW IT TO YOU ALL TOMORROW!!! :D:D:D YES TOMORROW!!! :D:D:D
I will show it to you as detailed as possible when the device is turned OFF and when the device is turned ON.And of course I will also take few pictures of the extension cord with the ON/OFF switch
and other wires which are used to turn the UAC data device ON and OFF.

Note that if this data process does not finish until tomorrow then it will DEFINETELY be finished until the day after tomorrow.But I hope it will be finished until tomorrow.
So what I am going to show you is:

-3 typical PC PSU wires used to give the full power to the UAC data device (nothing really special lol) :p

-1 extension cord with 3 power outlets with the ON/OFF switch which contains that small red light
(nothing really special lol) :p

-UAC data device :p

All these 3 things will be showed when the UAC data device is turned ON and turned OFF so you can see how it looks like.It will also be showed in a dark room when it's turned ON so you can also see how it looks like in dark. :p

I apologize for this taking me so long,but the reason was the damn power issue I had SO MANY FREAKING times lol so I had to make few modifications to that damn data device in order to FINALLY fix that once and for all lol.
And I finally finished that yesterday. :D

So when I finally post pictures tomorrow (finally lol) I want to hear your opinions! :D

What I am planning to do with the device in the future is to make a custom black plastic box in which that device will actually be hold into so that all those damn wires are not visible.Any recommendations to that are WELCOMED.

Anyway it will make a lot more sense once you see it tomorrow.

And yes...for those who are wondering the UAC data device IS COMPLETELY 100% portable.That means that there are NO other hardware components connected to each other and that in order to move the device to another place you need to disconnect each part from each other and then move them one by one.NO!It is NOT like that.It is in ONE SINGLE peace and that's just freaking great! :p
The only things which are not the part of the device are those 3 power wires and the extension cord in which those 3 power wires are connected to.But that's normal since wires which go to power outlets are LOGICALLY separated.Such as the PC power wire which goes to the PSU.It would be stupid if the wires AND the extension cord is glued to the device lol.It would look ridiculous lol.:D

Anyway tomorrow you can FINALLY expect to see FIRST images of the UAC data device!!!

Also note that the pictures I will upload tomorrow are going to show ONLY the UAC data device and ONLY THAT.
As for the UAC data complex center working environment room,I will take pictures of all that too and also make the video just as I promised.
But for now let's start with the UAC data device. :D

Can't wait to upload images tomorrow! :p
 

Virssagòn

VIP Member
NEWS:

It's been some time since I said I was gonna post first pictures of the things I have done so I think it's FINALLY time to post first pictures before I make the video I promised.Right now as I am writing this the data on my UAC data device is being moved from the DISK 6 to the DISK 1 and it will probably take until tomorrow since there are more than 500000 files in total and many of them are up to few GB in size.
And (believe it or not) when that finally finishes tomorrow,I am going to take the UAC data device from my UAC data complex center working environment room (which I will also show you as promised,just not tomorrow) and take it to my living room and put it on a small table.

WHY?

For ONE SINGLE reason.I am going to take few pictures of it with my digital camera from few different corners so I can FINALLY SHOW IT TO YOU ALL TOMORROW!!! :D:D:D YES TOMORROW!!! :D:D:D
I will show it to you as detailed as possible when the device is turned OFF and when the device is turned ON.And of course I will also take few pictures of the extension cord with the ON/OFF switch
and other wires which are used to turn the UAC data device ON and OFF.

Note that if this data process does not finish until tomorrow then it will DEFINETELY be finished until the day after tomorrow.But I hope it will be finished until tomorrow.
So what I am going to show you is:

-3 typical PC PSU wires used to give the full power to the UAC data device (nothing really special lol) :p

-1 extension cord with 3 power outlets with the ON/OFF switch which contains that small red light
(nothing really special lol) :p

-UAC data device :p

All these 3 things will be showed when the UAC data device is turned ON and turned OFF so you can see how it looks like.It will also be showed in a dark room when it's turned ON so you can also see how it looks like in dark. :p

I apologize for this taking me so long,but the reason was the damn power issue I had SO MANY FREAKING times lol so I had to make few modifications to that damn data device in order to FINALLY fix that once and for all lol.
And I finally finished that yesterday. :D

So when I finally post pictures tomorrow (finally lol) I want to hear your opinions! :D

What I am planning to do with the device in the future is to make a custom black plastic box in which that device will actually be hold into so that all those damn wires are not visible.Any recommendations to that are WELCOMED.

Anyway it will make a lot more sense once you see it tomorrow.

And yes...for those who are wondering the UAC data device IS COMPLETELY 100% portable.That means that there are NO other hardware components connected to each other and that in order to move the device to another place you need to disconnect each part from each other and then move them one by one.NO!It is NOT like that.It is in ONE SINGLE peace and that's just freaking great! :p
The only things which are not the part of the device are those 3 power wires and the extension cord in which those 3 power wires are connected to.But that's normal since wires which go to power outlets are LOGICALLY separated.Such as the PC power wire which goes to the PSU.It would be stupid if the wires AND the extension cord is glued to the device lol.It would look ridiculous lol.:D

Anyway tomorrow you can FINALLY expect to see FIRST images of the UAC data device!!!

Also note that the pictures I will upload tomorrow are going to show ONLY the UAC data device and ONLY THAT.
As for the UAC data complex center working environment room,I will take pictures of all that too and also make the video just as I promised.
But for now let's start with the UAC data device. :D

Can't wait to upload images tomorrow! :p

Are we finally gonna see your TOP SECRET PC???

That didn't happen in years lol, so I'm interested to see it, but on the other side I think it won't be much special xD.
 

S.T.A.R.S.

banned
Are we finally gonna see your TOP SECRET PC???

That didn't happen in years lol, so I'm interested to see it, but on the other side I think it won't be much special xD.

PC???
LoL did you even read my post properly?
I said I was gonna show you ONLY the UAC data device.Everything else I am gonna show you later.That includes ALL the computers and EVERYTHING else.

The UAC data device is something simple I made for myself to store data to.It is NOT the computer lol.I am gonna show you the computers and everything else later.Have patience lol.
 

Virssagòn

VIP Member
PC???
LoL did you even read my post properly?
I said I was gonna show you ONLY the UAC data device.Everything else I am gonna show you later.That includes ALL the computers and EVERYTHING else.

The UAC data device is something simple I made for myself to store data to.It is NOT the computer lol.I am gonna show you the computers and everything else later.Have patience lol.

That's disappointing...
 

spirit

Moderator
Staff member
tumblr_mrhlbrKTwA1rr8jsmo1_1280.jpg


Yay got my Athlon 64 back! Gave it to a friend back in January but he decided it’s a piece of crap so he gave it back to me.

#NobodyCares

:p

The AGP 6600 GT in this PC died the other day, and since it's not worth buying another AGP graphics card to replace it (since most of the cards on eBay will be nearing the end of the lives too), I just dismantled it and binned it today.

I've only got the DVD drive, both hard drives, some case fans and the case now, though I'll probably get rid of the case tomorrow along with an old printer.

Here are some photos of how I dismantled it before it was binned.

WP_000190_zps07660ec5.jpg


WP_000191_zpsa32d1b25.jpg


WP_000192_zps613ba09e.jpg
 
Last edited:
Top