RE: Speed Fan

b3atofang3l

b3atofang3l

New Member
hellow, i have just ran speed fan.

i dont know how to read it.

it says:

Temp1: 33C
Temp2: 29C
Temp3: -1C
HD0: 32C


I find these temperatures a bit high.... i have arctic cooling freezer pro and i got no clue which temp is the CPU temp.

Thanks for your guidance.

EDIT: I have the antec Sonata II case, there is a 120 MM fan at the back, i Set it to low because @ medium, the case gets loud. Is the low setting not good?
 
Last edited:
no, those temps are perfect.
run prime95 (in dual instances if you have dual core) to get a load temp for us. mine ends up around 45C full load.
 
We don't know for sure until you run Prime95. Probably temp 1 is your processor, temp 2 is your motherboard, and HD0 is your hard drive.

Ignore temp 3.
 
is 34C @ stock settings w/ Arctic Cooling Freezer 7 too high?

Some people say they get 23C


xD, is my processor/heat sink defected?
 
34C is idle, and I HAVE A BIG COOLER....its 25C in my room

/sob, i got the cooler yesterday and it doesnt seem to decrease my temp a lot

the P4 1.7 Ghz i had before runs @ 38C idle
 
b3atofang3l said:
34C is idle, and I HAVE A BIG COOLER....its 25C in my room

/sob, i got the cooler yesterday and it doesnt seem to decrease my temp a lot

the P4 1.7 Ghz i had before runs @ 38C idle
Click to expand...

It probably won't change the idle temp much, just mainly the load temp. Really, it's not that bad, just +9C. That would be roughly equal to 27C idle if you had an 18C room, which is what many people keep theirs at. What type of cooler do you have?
 
You must log in or register to reply here.
Back
Top