Search results

Ok, I reformatted my pc. Installed Core Temp and I'm idling at 42c which is pretty high im guessing. I will run orthos on stock cpu speed and voltage but with 5-5-5-12 ram timing and see what the temp will be if it exceeds 60 or 70 its my cpu cooler that will need to be changed. I have one more...

I took out ram and switched their places and changed the timing, It looks like it works. Im donna do a format now and I will go from there with the overclocking. Will post results in a bit.

DRIVER_IRQL_NOT_LESS_OR_EQUAL, this is the error message when I try loading cod4 or cod2. Im gonna update windows see if that helps if not check my ram could be that one is bad or something. If the ram is fine and the update didn't help I will format HDD and do a fresh installation of xp. I will...

Yea in my other PC put 400watt wont do me anything. I will check tomorrow all the connections and reroute the wires check ram check everything and format hard drive and I will post results when I'm well see whats going on with it.

Everything I reset the cmos running everything at stock I have a problem wont play any games when I start game I get a blue error screen and the pc restarts. Don't what is happening I will be checking the system again ram etc and doing format and then check with the overclocking. I will post...

Is the CPU cooler u showed me good if so I will check it out. I have 8 pin cpu connector plugged in checked it couple min ago took all the plugs out to make sure it was plugged into 8pin. I didn't add to much compound just enough so u don't see the heatsink. I checked DFI's website and I have...

I reinstalled the cpu im using tuniq tx-2 termal compund and still idles are around 40's put when I run orthos to check the stability after 10 mins without no errors temps reach high 70's 80's. Im thinking the cpu coolers is just bad and needs to be replaced. I will send it back to newegg and...

Didn't do anything runs hot on orthos test and shuts down. I will be looking a new cpu cooler or go with liquid cooling anyone knows a good cpu cooler that you can recommend for me. Thank You.

I cleaned the cpu block and readded tuniq tx-2 compound and im getting idle now at 40c-43c. I think I added to much the first time. I'm gonna run orthos now and see if my temps reach 70c-80c again.

Sry its blowing out. Im using this cpu cooler. http://www.newegg.com/Product/Product.aspx?Item=N82E16835101011. Im idling at 46c - 48c show load temps are alot higher. I run orthos 10 min and system shuts off cause of high temps. Anyone know or can recommend me a cpu cooler that is great for...

here are my current settings 450 core clock x9 multiplier. Voltage for cpu is 1.312.v. Ram timing 5-5-5-12, Ram voltage 2.2v. When I run orthos After 5min my cpu temp reaches over 70 close to 80c. Anyone know what the problem can be I have a aftermarket cpu cooler and back case fan blowing on it.

Ok I want to sell my mushkin 1gbx2 ddr2 800 and get mushkin 2x2gb ddr2 800 will there be a increase in performance. Also I need somehelp with cpu coolers something very good, that will keep my oc cpu temps low. I currently have the asus v60 92mm cpu fan but it doesnt that well. And I want to...

The cpu voltage is fine and the cpu clock is fine I ran the orthos stress cpu test for 4 hours and not 1 error. But when I ran the cpu and ram test in one I got errors so I think it is the ram causing the error. I currently have the ram voltage set to 2.1v can I go higher then this or no. One...

I ran orthos and I get errors. Anyone know what the problem can be.

ok boot seems to work everything is working I want to run orthos just to make sure no problems come up how long recommend me running it for.

Aight will try can somone explain why in cpu-z It read core 2670.5mhz and multiplier 6x when its 4005mhz and 9x multiplier and why is the voltage not showing it right in bios It shows 1.23v same in coretemp it shows 1.17v. Anyone know why this is.

I dont know what is happening I get 4ghz and it boots up and I run the cpu-z it reads 2600mhz and x6 multiplier and when I run core temp I get 4005mhz 445x9 but my vid is 1.175 is this right or is the voltage to low.

I tried do that but my pc keeps restarting here is what I got CPU Clock ratio - 9x CPU N/2 Ratio - Disabled Target CPU Clock - 4005 CPU Clock - 445 DRAM Speed - Auto Target DRAM Speed - DDR2 1069 In Voltage Settings CPU VID Special Add - Auto DRAM Voltage Control - 1.925v SB 1.05...

Thatguy16 has his cpu same one as mine running at 4ghz. So I know I get do it too.

I just got a new pc. I am running e8400 with an upgraded cpu cooler, and 2 gigs of gaming ram. I saw couple of people running this at 4ghz with ease. Anyone got the bios settings for it. I got enough cooling. I currently have it overclocked at 3.4ghz i get constant 39c and 42 under load. Hope to...