a good water cooling system

jutnm

jutnm

Active Member
whats good water cooling system that can cool down all components in the SLI/PC, like it goes from

watercooling filtration system/pump > goes to CPU> then goes to GPU ULTRA1> then goes to GPU ULTRA2> then goes back to watercooling filtration system/pump
 
all hahahha but i think im sticking with the KIt , its easier, but how do i know it will all work with the 2x 8800 Black Pearl Ed.
 
so i have to buy more tubing though to connect the 2 Videocards then back to the pump or reservoir ?
 
yes, plus some clamps, and a tube cutter if you wanna be pro about it.

edit: there is an edit button so you don't follow-post yourself.
 
Ya, you want clamps to connect the tubes to the barbs. Theresthatguys list was very nice for the set of parts, but you seriously are going to need more than a single radiator for those 3 parts. As I said in the other post, I would use the 2x120 from the kit, and maybe get another 120 or 2x120. You have a lot of hot parts that are getting cooled. If you have the room, another radiator isn't that expensive and would help keep everything cool. ;)
 
Nightrain said:
Ya, you want clamps to connect the tubes to the barbs. Theresthatguys list was very nice for the set of parts, but you seriously are going to need more than a single radiator for those 3 parts. As I said in the other post, I would use the 2x120 from the kit, and maybe get another 120 or 2x120. You have a lot of hot parts that are getting cooled. If you have the room, another radiator isn't that expensive and would help keep everything cool. ;)
Click to expand...

Why thank you :D
 
actually, id say a triple or double rad would be fine, you'll end up cutting flow too much if you add another rad, which will defeat the purpose
 
two rads in series will be better for flow rate then 1 by itself in theory.
with that said I would recommend at least a MCR 320 or a PA120.3
 
You must log in or register to reply here.
Back
Top