Adsl Wireless Router

[JOELAWSON14]

hey just wonderin wud this router be compatable with my wanadoo broadband connection currently dialling up broadband and connecting to the net will this router be compatable? (its not a ethernet connection telephone line

Description : ADSL Features
-Compatible with all leading DSLAMs

-Supports DMT modulation and demodulation

-Support ITU-T G.992.1 Annex A & T1.413 Issue 2 for Annex A

-Supports ITU-T G.992.1 (G.dmt) Annex B

-ETSI TS 101 388 / DTS TM-06006 for Annex B

-Supports ITU-T G.992.1 (G.dmt) Annex B - Deutsch Telecom / U-R2 for Annex B (U-R2)

-G.992.1 (G.dmt) : Downstream and upstream data rates up to 8 Mbps and 1Mbps

-G.992.2 (G.Lite) : Downstream and upstream data rates up to 1.5 Mbps and 512Kbps

-Tone detection for low power mode

ATM Features
-WAN Mode Support -PPP Over ATM (RFC2364) and PPP Over Ethernet (RFC2516)

- LAN Mode Support : Routed / Bridge Ethernet Over ATM (RFC-2684)

- Classical Internet Protocol Over ATM (RFC-1577)

- Support ATM SAR, ATM AAL5,ATM Forum UNI3.1 / 4.0 PVC and support up to 8 PVCS

Wireless Features
- Support IEEE 802.11g and 802.11b Wireless Access Point

- Support 128-Bit and 64-Bit WEP encryption

- Data rate Up to 54Mbps

- Transmit Power 15 dBm

- Receive Sensitivity : 11Mbps j -80dBm

54Mbps j -65dBm

Management Features
Firmware upgrade via FTP

Customize Web pages

WAN and LAN side connection statistics

Configuration of static routes and Routing table

Configuration of NAT / NAPT

Password protected access

Selection of Bridge or Router Mode

PPP user ID and password

Configuration of VCs (Virtual Circuits)

Physical Interfaces
- ADSL Modem / Router with four RJ-45 10/100 Base-T Ethernet port & an ADSL port

- ADSL Status, Power and switching hub LED indicators

Bridge Mode
- Ethernet to ADSL self-learning Transparent Bridging (IEEE 802.1D)

-Supports up to 128 MAC learning addresses

Router Mode
-DHCP Server and Client

- NAPT (Network Address and Port Translation)

- NAT (Network Address Translation)

- ICMP (Internet Control Message Protocol)

- IGMP (Internet Group Management Protocol)

Security Features
- Password protected configuration access

- User authentication (PAP / CHAP) with PPP

Ethernet interface
- Compliant with IEEE 802.3 and 802.3u 10/100 Mbps

- All Ethernet ports support auto-crossover (MDI/MDI-X)

DSLAM Compatibility
Interoperable with Alcatel, Cisco, Copper Mountain, ECI, Texas Instruments, Pairgain, Samsung, Lucent, Globespan, Efficient, ADI, Centillium, Newbridge, Nortel, Compaq, Conexant, Motorola, 3 Com, NLC, Anymedia, Nokia, Intel

Regulatory Approvals
- FCC Part 15 class B & Part 68

- CE Mark, EN 55022 - EN 55024 - EN 50081-1


Key Features

ANSI T1.413 Issue 2, ITU-T G.992.1(G.dmt) and G.992.2 (G.lite) compliant for Annex A
ITU-T G.992.1 (G.dmt) Annex B / ETSI TS 101 388 /DTS TM-06006 for Annex B (ETSI)
ITU-T G.992.1 Annex B - Deutsch Telecom / UR2 for Annex B (U-R2)
Downstream and upstream data rates up to 8Mbps and 1Mbps
Reaches up to 18K feet in distance
Configuration and management operated via WWW browser with password protected access
Firmware upgrade via FTP
WAN and LAN side connection statistics
Up to 8 ATM VCs
Support 54Mbps Wireless data rate
Compatibility with IEEE 802.11g and 802.11b (2.4GHz) standards
Wireless security with up to 128-bit WEP encryption
All Ethernet ports support auto-crossover (MDI/MDI-X)- No need for crossover cables
Compliant with IEEE 802.3 and IEEE 802.3u 10/100 Mbps
Share your ADSL Internet access on your wireless and Ethernet Networks
DMZ and Virtual Server function provided operating modes include routing, bridge, static IP, PPPoE, PPPoA etc

 

[Geoff]

ADSL uses a phone line for connection, and we cant tell by specs if it will work or not. Usually you can only go with the same brand as what the company told you, the best thing to do is call up your ISP and ask them.