Alright, so recently I've been thinking about adding more ram to my computer in hope that it's going to run much, much better than now. I just can't decide and I need your help and your opinion about this. It's about adding 4 GB ram.
Time of this report: 7/1/2011, 13:06:39
Machine name: P4
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp.080413-2111)
Language: English (Regional Setting: Croatian)
System Manufacturer: GBT___
System Model: AWRDACPI
BIOS: Award Modular BIOS v6.00PG
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz (2 CPUs)
Memory: 1024MB RAM
Page File: 1207MB used, 486MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
---------------
Display Devices
---------------
Card name: ATI Radeon HD 5600 Series
Manufacturer: ATI Technologies Inc.
Chip type: ATI display adapter (0x68D8)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_68D8&SUBSYS_21D91458&REV_00
Display Memory: 1024.0 MB
Current Mode: 1440 x 900 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.7093 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 5/27/2010 18:58:50, 299520 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 5/27/2010 19:37:06, 4830720 bytes
Device Identifier: {D7B71EE2-2B98-11CF-5D6C-D301A1C2CB35}
Vendor ID: 0x1002
Device ID: 0x68D8
SubSys ID: 0x21D91458
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D
-----
So the question is, is it going to work more slightly if I add 4 GB ram instead of one? or can I add 4 GB to the current 1GB so total it makes 5 GB ram.
I believe I have 2 places where I can put ram inside.
I recently replaced my graphic card to one with 1GB ram, ddr5. It had slighter changes,but nothing much about running slightly.
(I'm talking about gaming computer).
Time of this report: 7/1/2011, 13:06:39
Machine name: P4
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp.080413-2111)
Language: English (Regional Setting: Croatian)
System Manufacturer: GBT___
System Model: AWRDACPI
BIOS: Award Modular BIOS v6.00PG
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz (2 CPUs)
Memory: 1024MB RAM
Page File: 1207MB used, 486MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
---------------
Display Devices
---------------
Card name: ATI Radeon HD 5600 Series
Manufacturer: ATI Technologies Inc.
Chip type: ATI display adapter (0x68D8)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_68D8&SUBSYS_21D91458&REV_00
Display Memory: 1024.0 MB
Current Mode: 1440 x 900 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.7093 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 5/27/2010 18:58:50, 299520 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 5/27/2010 19:37:06, 4830720 bytes
Device Identifier: {D7B71EE2-2B98-11CF-5D6C-D301A1C2CB35}
Vendor ID: 0x1002
Device ID: 0x68D8
SubSys ID: 0x21D91458
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D
-----
So the question is, is it going to work more slightly if I add 4 GB ram instead of one? or can I add 4 GB to the current 1GB so total it makes 5 GB ram.
I believe I have 2 places where I can put ram inside.
I recently replaced my graphic card to one with 1GB ram, ddr5. It had slighter changes,but nothing much about running slightly.
(I'm talking about gaming computer).