Amd64 3000+ Oc

B

bl1tzk1213g

New Member
i got DFI LanParty nForce3 UT and AMD64 3000+ PC3200 512MB XMS Corsair... and i wanna oc... so far i've only OC'd 5% cause i don't know for how much ram could go, right now its 210x10 = 2.1... how far could most 3200rams go?
 
i currently have mine set to 220X10 and iv'e had it up to 235X10 (would go higher but my PSU wont take it :(

i have my memory timings set to auto and it has them at 3-3-3-6 (3-3-3-8 is stock for mine)
how far it will go im not sure
Joe
 
if you have the cooling for it. but i wold take a few steps (225, 230, atleast) to get there,

quote form another thread i posted in

i have found that mine likes to run higher 235+ when its cold but at my current room temp 15*C (60*F) its not so cold lol

currently at 2200 (220X10) its @24*C Mobo, 40*C CPU loaded

best was 2353 (235X10 1.675Vcore) Idle: 7*C and 9*C mobo/CPU Loaded: 8*C/23*C Mobo/CPU (upped from 2.2 with Clockgen) room temp of ~+3*C

Loading is done with Prime95

HSF is still stock,

i havent taken the time to up the FSB 1MHz at a time to find my absolute max been jumping by 5's, and memory is still all stock, i tried 2.4 but it locked up im thinking its since its trying to run the agp/pci at 80/40Mhz since i dont have a AGP/PCI Lock. Should of went with the Nforce chipset instead of the Via o well
Click to expand...

mine runs with a room fan to keep it cool (dont have enough case fans) so do watch the temp eh lol,
as it sits right now its running 26*c mobo temp, 43*C CPU 100%load (F@H folding) with my room temp at 20*C (69*F)

anyways im off to bed gota be at work in 6 hrs
Joe
 
kk i got mine 240*10 = 2.4 ghz but it wasn't as stable i think... so i put it to 235*10 = 2.35ghz at stock voltage. do i have to worry about frying my cpu or something? i got thermaltake venus 12. i chcked my temp using everest, it was about 37*C load i think... everest accurate?
 
haha thanks, im just not comfortable with everest, cause in my bios it reads differently. in my bios its always 45*C and up. and when i check everest, around 33*C... =/
 
if your un seure of everest Dl and try Motherboard Montior (Just google MBM5 ) and see how its temps are compaired to your bios and everest

Joe
 
haha thanks, im just not comfortable with everest, cause in my bios it reads differently. in my bios its always 45*C and up. and when I check everest, around 33*C...
Click to expand...
Well i wouldnt trust everest either.
 
ha, with the help of updating my bios, i think i got it. before i updated bios, i get 45*C and up with the program my mobo cam with. now, it idles about 33*C almost like everest...
Im currenly running @ 2.35 (235*10) at stock voltage around 1.47v temp at 33*C idle and 37*C load. i kno i could higher but im kinda worried about my ram. could my ram go about 260mhz? how could increase my speed/performance?
 
You must log in or register to reply here.
Back
Top