Yeah that would be nice if it worked. When I pop the Windows disc in it skips everything and goes to the suse startup screen...I have a different issue now though I tried ****ing around with it to see if I could create a partition and install windows that way and I think I ****ed it up pretty good. I get this during start up and can't get any farther:
Loading Piix
ICH4: IDE Controller at PCI slot 0000 :00: 1f .1
PCI: Enabling device 0000 :00: 1f .1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000 :00: 1f .1[A] -> LINK [LNKC] -> GSI 10 (level, low) -> IRQ 10
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda

MA, hdb

io
ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc

MA, hdd

io
input:AT Translated Set 2 Keyboard on isa0060/serio0
hda: FUJITSU MHT2060AT, ATA DISK drive
ide0 at 0x1f0-0x1f7 ,0x3f6 on irq 14
hda: max request size: 128KiB
hda:117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA (100)
hda: cache flushes supported
hda:
hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4243N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177 ,0x376 on irq 15
Loading Processor
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
Loading Thermal
ACPI: Thermal Zone [THRM] (53 C)
Loading fan
Loading reiserfs
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
hdc: ATAPI 24X DVD-ROM CD-R/RW drive. 2048KB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
input: SynPS/2 Synaptics Touchpad ON isa0060/serio1
Waiting for device /dev/root to apppear: Synaptics Touchpad, Model: 1, fw: 5.9, id: 0x236eb3, caps:
0x904713/0x10008
input: SynPS/2 Synaptics Touchpad on isa0060/serio1
..........not found -- exiting to /bin/sh
$
Then nothing...Not sure but I think this is bad. Help Me!!