ASRock Phantom Gaming 6 won't boot into windows 10 after BOIS update

[zillah]

Dear Experts

I have got motherboard ASRock Z390 PHANTOM GAMING 6 I have upgraded BOIS from P1.6 to P4.30G,,,,,update was successful following instructions in the link below
Now I am stuck in new BOIS I can't get it to windows 10

https://asrock.com/support/BIOSIG.asp?cat=BIOS9

I have removed COMS battery still no joys

I can't find an options for choosing my SSD hard drive (below link has 4 snapshots)

https://imgur.com/a/snfftwx

Thanks for help

 

[johnb35]

When you upgrade bios, it usually puts all the settings back to default. So my guess is that possibly the SSD (assuming NVME) port is disabled. You'll need to go into the advanced settings tab and then click on storage configuration and see whats in there.

 

[zillah]

Thx John will check that

 

[StrangleHold]

Have you tried getting into the bios instead of that boot screen? Start hitting F2 when booting. See if the bios can see the boot drive and turn off fast boot and see what happens.

 

[zillah]

No problem will check that as well
Thx