Ballistix @ 1000MHz

[Kornowski]

At the moment I have my RAM running at 800MHz with a 1:1 divider... do you think if I changed it to 2.5 (don't know what ratio that is?) and had it running at 1000Mhz, it'd be Ok...

Would I need 2.2v for that? at the moment I have 1.8v on the RAM!

Thanks!

 

[Cromewell]

You will more than likely have to overvolt it. I don't know if you'll need 2.2v or not, you can try 2v first if you want, at worst you have to reset it and try again. On the other hand, I think Crucial doesn't care if you overvolt to 2.2v so you can go right there.

 

[lovely?]

well the ram i have, the OCZ reaper cl3 takes 2.4 V just to get it to 800mhz and 3-4-4-12, so i'm guessing 2.2 is about your butter zone. also dont forget to loosen the timings considerably the first time, like 6-6-6-21 or something...

 

[Kornowski]

Alright, thanks guys, I'll give it a go at 2v...