Blue Screen of Death During Install Ahhhhhh!

Jiffyman

Jiffyman

New Member
Here is the error.

A problem has been detected and windows has been shut down to prevent damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

I already know these steps and you probably do too.

Technical information:

*** Stop: 0X0000000A (0X0B6580C0, 0X00000002, 0X00000001, 0X804ED60A)

I have tried the installation many many times. Please help me this is really starting to piss me off. This is a new computer never been used.
 
is it a custom built? if so it could be caused by a bad motherboard, bad ram, or overheating.
 
You know I thought so too. I tried to change the video card didn't do anything and I tried to change the ram that did something now I got a new error.


Here is the error.

A problem has been detected and windows has been shut down to prevent damage to your computer.

PAGE_FAULT_IN_NONPAGE_AREA

If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

I already know these steps and you probably do too.

Technical information:

*** Stop: Here is the error.

A problem has been detected and windows has been shut down to prevent damage to your computer.

PAGE_FAULT_IN_NONPAGE_AREA

If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

I already know these steps and you probably do too.

Technical information:

*** Stop: 0X00000050 (0X9056536C, 0X00000000, 0X805815B2, 0X00000000)
 
Run a memory test. Download Memtest86, it's ISO to create a bootable CD. Boot to it and it automatically runs. Let it run a good 10 or 11 passes. You should see no failure if good. Any failures will show up in read you'll see what i mean.. :)
 
I had the same error as your first one when installing xp pro oem but then I tried xp home and it installed perfectly, I never understood why but it works now.
 
In a way yes, but it is too slow for me. I still need to fix the problem that is causeing me to disable it, but I'm giving up for now. I'm using my board that was messed up.
 
Last edited:
You must log in or register to reply here.
Back
Top