BSOD drove mr CRAZY!!!!!help needed!!!!

For his system a 500-550 watt unit will suffice. But until he posts those dumpfiles then we really can't be sure whats going on.
 
not yet because i could not find a proper PSU for it in the bestbuy in met town..

id see if you can test it first, there may be nothing wrong with it and you will waste money replacing it. Might aswell have rebuilt and upgraded the whole pc ;p

plus if the HDD went bad. The pc would still post you just couldnt boot it into windows. If it wont post it would unlikely be the PSU unless it has completely died. Most likely RAM, PSU if its pretty much dead.

Try each Ram stick in every slot and see if it boots up.
 
Last edited:
id see if you can test it first, there may be nothing wrong with it and you will waste money replacing it. Might aswell have rebuilt and upgraded the whole pc ;p

plus if the HDD went bad. The pc would still post you just couldnt boot it into windows. If it wont post it would unlikely be the PSU unless it has completely died. Most likely RAM, PSU if its pretty much dead.

Try each Ram stick in every slot and see if it boots up.

yeah i will try that, thanks!!

For his system a 500-550 watt unit will suffice. But until he posts those dumpfiles then we really can't be sure whats going on.

attached is one of those dump files analysis result by windbg, thanks!

For his system a 500-550 watt unit will suffice. But until he posts those dumpfiles then we really can't be sure whats going on.

here is another one, this one was generated the first time BSOD after i reinstall the win7, running NFS 17, as far as i can remember.
 

Attachments

Last edited by a moderator:
You had the wrong symbols when you analyzed those dump files. Can you give me the original minidump files?
 
From the output I got, the first one was referenced a hardware device not found and the last one was hard disk error.

Either a bad/corrupt windows, failing hard drive or motherboard issue.
 
From the output I got, the first one was referenced a hardware device not found and the last one was hard disk error.

Either a bad/corrupt windows, failing hard drive or motherboard issue.

new p8z77 and Western digital black 500GB is on the way, lets see if problem could be solved , thank you so much!!!!
 
From the output I got, the first one was referenced a hardware device not found and the last one was hard disk error.

Either a bad/corrupt windows, failing hard drive or motherboard issue.

Well, HDD issue. But I'm not sure if there is any critical problem with the old MB that might caused failures on my HDD, so I replaced both of them. I also put the GTX 560 ti on and it works just fine! So I returned the GTX 660. Thanks all of you, very helpful information. :)
 
Back
Top