BSOD :mad:

driverdj2000

driverdj2000

New Member
HI ALL,
just recieved my 2nd BSOD in a week.
built my computer 9 mnths ago and was running sweet til now.
i checked error code and seems to point to a process or thread in windows.
can anybody shed more light on the problem
using win 7 ultimate 64
here is the report:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 6153

Additional information about the problem:
BCCode: f4
BCP1: 0000000000000003
BCP2: FFFFFA8005DFCB30
BCP3: FFFFFA8005DFCE10
BCP4: FFFFF80001FCC5D0
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\112310-23524-01.dmp
C:\Users\Tony\AppData\Local\Temp\WER-24788-0.sysdata.xml

Read our privacy statement online:
 
Which process or service caused the issue?

Also, have you manually set up RAM speed, timings and voltage in BIOS?
 
Thanks for replying,
i looked up the code and it said a process or thread.
no idea which one, if any.
i just hope its software related.
havent got timings changed althouth my sticks are 8-8-8-24 but are running at 9-9-9-24. this was done by default so didnt want to change,
should i reset all bios settings to default? might help
 
You are right it is because of a process or thread, it is when a system process or thread terminates unexpectedly. Most likely, the cause is some sort of virus, change in software, or a driver issue rather than hardware.

Start out by uninstalling and reinstalling your drivers, and see if that solves it. If not, follow the advice given here:

http://www.computerforum.com/131398-important-please-read-before-posting.html

and post your report should it not solve the problem
 
yeah ill do that. i ran a few hardware tests and everything comes up ok.
as long as it not hardware im not too worried
windows is easily reinstalled
.avg and malwarebytes came up clean. ill update a few drivers and see how i get on.
Thanks guys!!!!!!!!:good:
 
There are a few cases of it being memory related, but they are few and far between, a couple hours of memtest will show that your memory is fine. Hard drive would be the only component that would be likely to be causing it. You can get the utility to test your drive from your manufacturer's website, I wouldn't use any from another manufacturer, or any generic ones because, for example, the WD utility is designed to show faults specifically for WD drives, so is much better and finding and showing these faults, and less likely to show spurious or incorrect errors
 
You must log in or register to reply here.
Back
Top