I'm building a new computer using the money that I have saved up the past month. My budget is around $1800 and no higher than $2000. I've picked out most of the parts and will list them below. Any critique is welcome and appreciated!
Computer Specs:
Case: COOLER MASTER COSMOS
Motherboard: Foxconn
Hard Drive: Seagate Barracuda 7200
Power Supply: COOLER MASTER 1000w
Processor: AMD Athlon 64 X2 6400+
RAM: Corsair Dominator 2GB
Video Card: EVGA GeForce 8800GTX 768MB
Well, that's what I have picked out so far, but now I get to the part where I really need help from someone who is knowledgeable about Water Cooling. Since I'll be running a AMD Athlon 6400+ and eventually SLI the 8800GTX's I think water cooling would be the way to go. I have chosen a CPU Block, 8800 Block, pump, radiator and reservoir, but they are all subject to change so if you would like to recommend something better then please do! My main concerns are about leaking because a 6400+ and an 8800FTX are terrible things to waste. Ill show you what I have picked out so far for the Water Cooling loop.
Fluid: Fluid XP Ultra (Supposed to be non-conductive in case of leaks)
CPU Block: Swifttech
Radiator: Danger Den OR Swifttech
8800 Block: Zalman
Reservoir: XSPC Passive
Pump: Swifttech
So far that is all that I have chosen for the Water Cooling. I would truly appreciate any help with choosing ANY parts for this PC. If you have heard bad things about any of these parts please let me know.
Feel free to critique, help, shoot me down, etc!
Thanks in advance.
Computer Specs:
Case: COOLER MASTER COSMOS
Motherboard: Foxconn
Hard Drive: Seagate Barracuda 7200
Power Supply: COOLER MASTER 1000w
Processor: AMD Athlon 64 X2 6400+
RAM: Corsair Dominator 2GB
Video Card: EVGA GeForce 8800GTX 768MB
Well, that's what I have picked out so far, but now I get to the part where I really need help from someone who is knowledgeable about Water Cooling. Since I'll be running a AMD Athlon 6400+ and eventually SLI the 8800GTX's I think water cooling would be the way to go. I have chosen a CPU Block, 8800 Block, pump, radiator and reservoir, but they are all subject to change so if you would like to recommend something better then please do! My main concerns are about leaking because a 6400+ and an 8800FTX are terrible things to waste. Ill show you what I have picked out so far for the Water Cooling loop.
Fluid: Fluid XP Ultra (Supposed to be non-conductive in case of leaks)
CPU Block: Swifttech
Radiator: Danger Den OR Swifttech
8800 Block: Zalman
Reservoir: XSPC Passive
Pump: Swifttech
So far that is all that I have chosen for the Water Cooling. I would truly appreciate any help with choosing ANY parts for this PC. If you have heard bad things about any of these parts please let me know.
Feel free to critique, help, shoot me down, etc!
Thanks in advance.
Last edited: