Hi Schoning16, sorry for the late reply,
Details below:
General Information :
DIMM1 (RAS 11, RAS 12) : 256 (Double Bank)
DIMM2 : Empty
Information SPD EEPROM (DIMM1) :
Manufacturer : Micron Technology
Part Number : 16VDDT3264AG-265B1
Serial Number : 77001CD3
Type : DDR-SDRAM PC-2100 (133 MHz) - [DDR-266]
Size : 256 MB (2 rows, 4 banks)
Module Buffered : No
Module Registered : No
Module EPP : No
Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 8
Refresh : Normal (15.625 µs), Self Refresh
Voltage : SSTL 2.5v
Prefetch Buffer : 2-bit
Manufacture : Week 46 of 2002
Supported Frequencies : 100 MHz, 133 MHz
CAS Latency (tCL) : 2 clocks @100 MHz, 2.5 clocks @133 MHz
RAS to CAS (tRCD) : 2 clocks @100 MHz, 3 clocks @133 MHz
RAS Precharge (tRP) : 2 clocks @100 MHz, 3 clocks @133 MHz
Cycle Time (tRAS) : 5 clocks @100 MHz, 6 clocks @133 MHz
Information SPD EEPROM () :
Manufacturer : Unspecified
Part Number : Unspecified
Serial Number : Unspecified
Type : DDR2-SDRAM PC2-0 (0 MHz)
Size : 0 MB (2 ranks, 0 banks)
Module Buffered : No
Module Registered : No
Module EPP : No
Width : 16-bit
Error Correction Capability : No
Max. Burst Length : 0
Refresh : Normal (15.625 µs)
Voltage :
Prefetch Buffer : 4-bit
Manufacture : Week 0 of 2000
Supported Frequencies :
CAS Latency (tCL) :
RAS to CAS (tRCD) :
RAS Precharge (tRP) :
Cycle Time (tRAS) :
Memory Controller Information :
Memory Controller : Standard, FPM, EDO, Parity, ECC, SIMM, DIMM, Burst EDO,
SDRAM
Number of connectors : 2
Max. Module Size : 512 MB
Max. Memory Size : 1024 MB
Supported Speed : 70ns, 60ns
Supported Voltages : 3.3v
Error Detection Method : 64-bit ECC
Error Correction Capability : None
Current/Supported Interleave : 1-way/1-way
thanks.
and thanks to you, Cromewell.