Can't Figure it out

[joelkyr]

Ive'd just installed 4 led fans to the rig that Im building, but my problem now is where do I connect the 3 pin power cable of my fan, I only got 4 power cable, 1 for dvdrom/ 1 for cdrw/ 1 for hardrive and 1 for floppydrive, so I need advice as to were is should be connected.

 

[Praetor]

where do I connect the 3 pin power cable of my fan,

On the motherboard there should be one or more 3-pin power connectors (similar to the plug your CPU fan is connected to) ... if not you'll have to get a 4-pin adapter like this: http://www.xoxide.com/3to4pinadaptor.html

 

[joelkyr]

I'ved already used the 2 3pin power connector on my MOBO, do you think it would make my PC unstable if I connect it to my hardrive power supply or dvdrom pwr supply. THANKS

 

[Praetor]

do you think it would make my PC unstable if I connect it to my hardrive power supply or dvdrom pwr supply

Considering most fans dont use more than half a watt of power and no more than two or three watts you should be fine

 

[joelkyr]

Thanks Again Praetor!!!!!!

 

[Praetor]

No problem glad I could help