Can't Install XP On My 250 GB Maxtor Harddrive

V

vxdesigns

New Member
Hi people how are you. I have been having problem installing windows XP on my

" Maxtor / DiamondMax 10 / 250GB / 7200 / 16MB / ATA-133/ OEM / RoHS Compliant "

harddrive. It has two partitions currently. One is C: and the second is D: I currently have XP on C: and my data and backup files on D: So i recently decided to install fresh xp copy. I restarted the computer inserted the xp CD and the CD initialized by saying press any key to boot from CD. I pressed enter and then a black screen awaits me, after 5 minutes still black screen, after 10 mins still black screen so restarted and tried it again, i thought mayb the cd or my pc froze on me. After restarting still same issue. So i restarted and inserted windows 98 Cd inside and the setup was completed without any problems. It was very weird, so i decided to delete all the paritions and format the whole hard drive as one partition. And luckily this time it worked, xp was installed. Now my questions to you are

1)what could be wrong that i was not able to setup XP when there were 2 partitions. I still have two partitions and would like to re-install xp on C: drive

2)whats the best way to install a OS if i have a

"Diamond Stealth Radeon 9250 / 256MB DDR / PCI / DVI / TV-Out "

video card installed in my pc, should i remove it and then install any os and then within os install the drivers and so on, or installing an OS while the video card is installed in my pc. Is there any difference between using either methods

3) just for kicks what do you think of my harddrive and video card specs ?

Thx in advance
 
1) no clue

2) leave it in. it should use a standard VGA driver for temporary use

3) hard drive is good video card is kinda old
 
You see that's the problem "it does not" do what a windows xp installation normally would do. This is what is exactly happening

1) I put in the Windows Xp Pro Sp2 inside and boot from the cd rom.
2) It shows me the message that "Press any key to boot from cd" So i hit enter
3) It shows me the message "Setup is inspecting your system's hardware configuration "

Normally after this message a blue screen should popup asking to "press F6 if you need to install any third-party or RAID drivers" right ? But this screen does not show up right after the 3rd step there is a complete black screen like a blackhole sucking my patience right in it. I have waited 10 mins 20 mins 30 mins still nothing and i have tried this 4-8 times. FYI the cd is not scratched or broken, as i just finished installing xp the same exact way i always do on my old WD 15 GB harddrive, so that means something is wrong with my Maxtor 250 GB hard drive. Now that being said anyone have any idea as to what's wrong ? I have been searching guides/notes/tips/ and searching on google for almost 5 days now and i came up with a few questions

1) is it the 137 GB space windows xp space barrier involved here ? i thought that was an issue only with windows xp before the sp1 and sp2 was out

2) does it has to do something with my bios or motherboard not supporting this huge hard drive ? Although i do see my harddrive active and alive in my bios setup

3) should i update my bios and motherboard drivers as i havent done so in many years. Is this safe ?

4) i can install a fresh copy of windows 98 on this same harddrive without any problems, then why xp only ?

5) i called up Maxtor helpline and explained to the rep what my problem was, he advised me that it should be a Microsoft software problem/issue and that i should contact Microsoft. Did he just get away with a lame excuse ?

Thx in advance
 
it could have been that you had a problem with the dos partition...did you try checking the hard drive using a win98 bootup disk?
 
You do know that even if you have two partitions, after reinstalling XP on C: you'll have to format D:, which'll make you lose everything, right? You still need to back up what you want to keep somewhere else.
 
You must log in or register to reply here.
Back
Top