Syndicate1
New Member
For reasons I need not discuss I am behind 4 routers so my network looks like this: modem -> Router1 -> Router2 -> Router3 -> Router4
Router 4 has my USB hard drive attached to it of which I am attempting to access remotely using ReadyShare.
I have full access to all of the routers, and please I need no criticism on the setup or anything. Just looking for advice on how to configure the routers to allow me to input my IP Address ##.##.##.##/shares/ and be able to access my hard drive. I am able to do it being a part of the network, but can not do it remotely.
If it helps at all I am able to type in my WAN IP of the modem /shares and it still connects me to the hard drive. But if I am outside of the network I have no access.
ip addresses of the routers 1): 192.168.3.1 2): 192.168.1.1 3):192.168.5.1 4): 192.168.10.1
the WAN addresses of the routers are 1): My actual IP 2): 192.168.3.100 3): 192.168.1.104 4): 192.168.5.4
Right now because of my experience with gaming in the past I have just setup a DMZ on each of the routers to the desired location. So setting a DMZ on router 1 to 192.168.3.100 router 2 192.168.1.104 etc.
Unfortunately it does not appear to work for remote access to my USB storage device attached to Router 4
Also I am given a choice to choose which port I would like to use for ReadyShare and right now it is set to port 80, could this be where the problem lies?
Router 4 has my USB hard drive attached to it of which I am attempting to access remotely using ReadyShare.
I have full access to all of the routers, and please I need no criticism on the setup or anything. Just looking for advice on how to configure the routers to allow me to input my IP Address ##.##.##.##/shares/ and be able to access my hard drive. I am able to do it being a part of the network, but can not do it remotely.
If it helps at all I am able to type in my WAN IP of the modem /shares and it still connects me to the hard drive. But if I am outside of the network I have no access.
ip addresses of the routers 1): 192.168.3.1 2): 192.168.1.1 3):192.168.5.1 4): 192.168.10.1
the WAN addresses of the routers are 1): My actual IP 2): 192.168.3.100 3): 192.168.1.104 4): 192.168.5.4
Right now because of my experience with gaming in the past I have just setup a DMZ on each of the routers to the desired location. So setting a DMZ on router 1 to 192.168.3.100 router 2 192.168.1.104 etc.
Unfortunately it does not appear to work for remote access to my USB storage device attached to Router 4
Also I am given a choice to choose which port I would like to use for ReadyShare and right now it is set to port 80, could this be where the problem lies?