i'm considering upgrading my socket478 p4 1.8ghz to a higher speed cpu i had considered upgrading the same family pentium.....but it's too expensive but celeron is much cheaper i only had enought money to go for celeron D around 2.8ghz same L1 and 2 as the current one would it be faster/slower because its celeron , pc spec below
Cpu wanted: http://tekgems.com/Products/et-1270...0d478-n.htm?frg
my friend told me that i should upgrade ram instead of a newer/faster cpu. any recommendation?
CPU-Z Report
--------------------------------------------------------------------------------
CPU-Z version 1.24.
CPU(s)
Number of CPUs 1
Name Intel Pentium 4
Code Name Willamette
Specification Intel(R) Pentium(R) 4 CPU 1.80GHz
Family / Model / Stepping F 1 2
Extended Family / Model 0 0
Brand ID 8
Package mPGA-478
Core Stepping D0
Technology 0.18 µ
Supported Instructions Sets MMX, SSE, SSE2
CPU Clock Speed 1794.5 MHz
Clock multiplier x 18.0
Front Side Bus Frequency 99.7 MHz
Bus Speed 398.8 MHz
L1 Data Cache 8 KBytes, 4-way set associative, 64 Bytes line size
L1 Trace Cache 12 Kµops, 8-way set associative
L2 Cache 256 KBytes, 8-way set associative, 64 Bytes line size
L2 Speed 1794.5 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 256 bits
Mainboard and chipset
Motherboard manufacturer Dell Computer Corporation
Motherboard model Dimension 8200,
BIOS vendor Dell Computer Corporation
BIOS revision A03
BIOS release date 12/07/2001
Chipset Intel i850 rev. A3
Southbridge Intel 82801BA (ICH2) rev. 4
Graphic Interface AGP
AGP Status enabled, rev. 2.0
AGP Data Transfert Rate 4x
AGP Max Rate 4x
AGP Side Band Addressing supported, enabled
AGP Aperture Size 256 MBytes
Memory
DRAM Type RDRAM
DRAM Size 512 MBytes
DRAM Frequency 299.1 MHz
FSBRAM 4:3
Total CAS# (tRDRAM) 10 clocks
Row To Column (tRCD) 7 clocks
# of memory modules 4
Module 0 Samsung RDRAM PC800 - 128 MBytes
Module 1 Samsung RDRAM PC800 - 128 MBytes
Module 2 RDRAM PC714 - 256 MBytes
Module 3 RDRAM PC714 - 256 MBytes
Software
Windows version Microsoft Windows XP Workstation Service Pack 1 (Build 2600)
DirectX version 9.0c
Cpu wanted: http://tekgems.com/Products/et-1270...0d478-n.htm?frg
my friend told me that i should upgrade ram instead of a newer/faster cpu. any recommendation?
CPU-Z Report
--------------------------------------------------------------------------------
CPU-Z version 1.24.
CPU(s)
Number of CPUs 1
Name Intel Pentium 4
Code Name Willamette
Specification Intel(R) Pentium(R) 4 CPU 1.80GHz
Family / Model / Stepping F 1 2
Extended Family / Model 0 0
Brand ID 8
Package mPGA-478
Core Stepping D0
Technology 0.18 µ
Supported Instructions Sets MMX, SSE, SSE2
CPU Clock Speed 1794.5 MHz
Clock multiplier x 18.0
Front Side Bus Frequency 99.7 MHz
Bus Speed 398.8 MHz
L1 Data Cache 8 KBytes, 4-way set associative, 64 Bytes line size
L1 Trace Cache 12 Kµops, 8-way set associative
L2 Cache 256 KBytes, 8-way set associative, 64 Bytes line size
L2 Speed 1794.5 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 256 bits
Mainboard and chipset
Motherboard manufacturer Dell Computer Corporation
Motherboard model Dimension 8200,
BIOS vendor Dell Computer Corporation
BIOS revision A03
BIOS release date 12/07/2001
Chipset Intel i850 rev. A3
Southbridge Intel 82801BA (ICH2) rev. 4
Graphic Interface AGP
AGP Status enabled, rev. 2.0
AGP Data Transfert Rate 4x
AGP Max Rate 4x
AGP Side Band Addressing supported, enabled
AGP Aperture Size 256 MBytes
Memory
DRAM Type RDRAM
DRAM Size 512 MBytes
DRAM Frequency 299.1 MHz
FSBRAM 4:3
Total CAS# (tRDRAM) 10 clocks
Row To Column (tRCD) 7 clocks
# of memory modules 4
Module 0 Samsung RDRAM PC800 - 128 MBytes
Module 1 Samsung RDRAM PC800 - 128 MBytes
Module 2 RDRAM PC714 - 256 MBytes
Module 3 RDRAM PC714 - 256 MBytes
Software
Windows version Microsoft Windows XP Workstation Service Pack 1 (Build 2600)
DirectX version 9.0c