CPU-Z memory settings...?

[grazhopper]

So ive been trying to diagnose whats been wrong with my ram, so can someone take a look at my CPU-Z reading and tell me if anything looks out of the ordinary?

http://img684.imageshack.us/img684/4171/cpu7.jpg

my issue is that when I have 2 sticks of ram in the system it works fine, but I often get blue screen and have to work to get on when i have 3 in. I changed the memory timings manually and it still is giving me issues. The ram says my timings are 9-9-9-24

 

[StrangleHold]

If the voltage and timing are right, try setting the command rate to 2T.

 

[Cromewell]

Is the system fine with any combination of 2 sticks or have you only tried it with the same 2? Also have you tried using different slots?

 

[Vampiric Rouge]

It's the RAM config. Under Nehalem CPU the rams speeds changed depending on how many banks you are using. The more banks the slower the RAM speed.

 

[grazhopper]

so i tried changing the timings in bios and changed the voltage to 1.49 (even though the recommended was 1.5V) and the problem still happens. I turn on my computer and it gives me the same MEMORY_MANAGEMENT blue screen. Anything else I can do to diagnose this RAM?

 

[Cromewell]

Is the system fine with any combination of 2 sticks or have you only tried it with the same 2? Also have you tried using different slots?

Have you tried this?

 

[Vampiric Rouge]

Here is a dell white paper on what I have been trying to explain. Maybe this will help you figure out what speed you need to clock your ram at better then I am doing.